Former Cummins owner, I had a pumped 24v with compounds so I understand diesel enough.
I just recently purchased a 2010 Jetta tdi 6spd mt with169k. Thought it was my maf, changed that nothing.
Car in limp mode accelerates slow. I bought an egr block off plate, exhaust, diesel geek fix for intake manifold waiting for them to come in.
Codes are p2008 intake manifold runner control circuit open bank 1
P13D9 this is glow plug I think.
P0401 egr flow insufficient
P00AF boost control A module performance
P2463 dpf restriction
I also ordered a vagcom for my cpu.
I’ve searched for my codes and haven’t came up with a definite answer. Any advice is greatly appreciated.
Thank you for you time.
I just recently purchased a 2010 Jetta tdi 6spd mt with169k. Thought it was my maf, changed that nothing.
Car in limp mode accelerates slow. I bought an egr block off plate, exhaust, diesel geek fix for intake manifold waiting for them to come in.
Codes are p2008 intake manifold runner control circuit open bank 1
P13D9 this is glow plug I think.
P0401 egr flow insufficient
P00AF boost control A module performance
P2463 dpf restriction
I also ordered a vagcom for my cpu.
I’ve searched for my codes and haven’t came up with a definite answer. Any advice is greatly appreciated.
Thank you for you time.