MAF issue... P0103 code

[TriviaSteve]

Having an issue with this. I replaced the MAF sensor with a brand new one, and it's still throwing that code. Any advice?

TIA...

 

[STDOUBT]

Any advice?
Always read about your code:
http://wiki.ross-tech.com/wiki/index.php/16487/P0103/000259
And do the stuff in "Possible Solutions".

 

[Meister Kraft]

Having an issue with this. I replaced the MAF sensor with a brand new one, and it's still throwing that code. Any advice?
TIA...

How did you figure the MAF was faulty?

 

[Tdijarhead]

If it’s a brand new Bosch, then check the wire plug. My daughter was having a problem with her 03 and the MAF plug just wasn’t making a good connection.

If it’s not a new Bosch then that is likely the problem....still.

 

[TriviaSteve]

Had Auto Zone plug it in to get the code...

TDIjarhead, it is a brand new Bosch. I will check and clean the connection. Will see if that works. Apparently, after some additional research, that does seem to be the biggest problem with that.

Thanks STDoubt. will check that out.

 

[TriviaSteve]

used some of the QD Electronic Cleaner on the connection. Two applications and the light went off and it seems to be running much better. Thanks for the suggestion!

 

[Tdijarhead]

Great news, that’s exactly what my daughters problem was. Just a bad connection.