How to Program the remote

[BUG*PWR]

To program the remote:
Take one key and put it in the ignition and turn the ignition ON.
Close and lock the driver's door with the second key (while the ignition remains on).
Take the first remote and press the "UNLOCK" button ONCE only - alarm will 'beep'
but door will remain locked.
With the key, unlock and lock the door again.
Test the remote by pressing the "UNLOCK" button again - door should unlock.
Open the door and turn ignition off and back on again using the first key.
Continue the procedure for the second remote - close & lock the door with the second
key (leaving the ignition on).
Take the second remote and press the "UNLOCK" button TWICE - alarm will 'beep'
each time button is pressed but door will remain locked.
With the key, unlock and lock the door again.
Test the remote by pressing the "UNLOCK" button again - door should unlock.
Remove both keys, close the door and perform a final retest by locking and unlocking
the car with both remotes

------------------
It ain’t the horsepower it’s the Torque !

.
..........|
........-^-
....-/_____\-
...(O\__o__/O)
...[#]oxxxo[#]