dual front Fog wiring question

[Brasil]

I have some after market angel eye R32 style headlights with foglights, and also bought Bleached Bora's HID fog lights.

Is there a way to wire the euroswitch so that the first foglight detent runs one set of fogs, and the second runs the other (i.e. the other set of front foglights instead of rear fog?)

Thanks, Mark

 

[whatnxt]

On the switch connector, Pin 8 first pull and Pin 9 is the second.


BTW, BB's fog lights are not HIDs. The HIDs are driving lights.

 

[Nihilator]

Blasphemous as it may be to link to vwvortex from here...http://forums.vwvortex.com/zerothread?id=2901890.

I did it.

--Chris

 

[Brasil]

Cool!

 

[Ed's TDI]

With my previous setup, I had my lower fogs (Hella Micro DE's) activated via the first pull on the Euro-switch, and the built-in headlight fogs (E-codes) activated with the scond pull. This gave me the ability to use one or both sets of fogs both with or without the headlights.