getting ready to purchase vcds in the hex usb can version. I seem to remember that there used to be a limit to the number of cars that you can hook this to. Is that still the case?
combo switch? I did try the wipers and they worked. Our ignition switch is getting *****y, and gets worse depending on how cold it is (meaning that sometimes it needs a wiggle for it to light the starter). It is supposed to warm up today. Do you think if I go home and the lights are working...
Short story, the vehicle is an 03 golf tdi 5spd. Lights functioned as normal last night. This morning there are no headlights, and no blinkers. You can flash the highs, but no constant on. The lows don't come on at all. The blinkers work everywhere if hazard system is used. It was dark so...
okay here is the info on the actual report sheet. As a note I bought the car new and the caster on the front right has never been in spec. Here is how it sits after the adjustments:
Frnt Left
camber -.3 rng:-1.0 to 0.0 in tol
caster 7.2 rng:7.2 to 8.2 in tol
toe -.01...
Two weeks ago I had the golf aligned after I installed new struts. Everything was working great. Then last Friday the front end made contact with the pavement entering a parking lot (started pulling right). Since I have firestone lifetime alignment I dropped it off today. They tell me that...
Your exactly right. My lower cover is no more...it has been abused by its close proximity to the ground and was in such poor condition that I removed it. Maybe I'll go ahead and make that aluminum one I've been thinking about.
Last week I had a huge power loss in my vehicle while driving home from work. I don't have a vag com so I couldn't pull the code. I did some digging on here and checked the Maf sensor by unplugging and going for a ride. That didn't help except that my wife and I noticed that we werent'...
Alternator progress report!!!
I have just rolled 150.000 miles and the alternator pulley still functions without a hitch. Just thought I would let everyone know.
Later.
thanks for the info indigo, but I believe that the h2sports lower your vehicle don't they? Ground clearance is a must for where I live, hence wanting to retain the stock ride height.
I have been reading for quite a long time here, but this is the first post in this forum I believe. We'll see if the info is in there now. I am looking for just the spindles/knuckles from the TT/R32 so that I can change my camber curves. I don't really have much interest in bigger brakes at...
Just want to see if anyone has some audi TT or R32 spindles for sale. Also looking for Shine SRS pieces (springs and bar, not dampers unless they are really low miles) that need a good home.
Would also be nice if anyone has ideas on where to find some spindles.
thanks!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.