Nuje
Top Post Dawg
- Joined
- Feb 11, 2005
- Location
- Island near Vancouver
- TDI
- 2015 Sportwagen; Golf GLS 2002 (swap from 2L gas); 2016 A3 e-tron
pm'd
Forum rules require you post an asking price.Ok fellas, had a wierd issue today that leads me to selling a OEM 1 year old upper tranny mount mk4 Alh. Had shifting issues, bought used parts at wreckers to find that my upper Mount bolts were just loose causing issue. Mounts stiff. Make offer
This thread is not in the Private TDI Items For Sale/Wanted Forum and, as such, is skirting TDIClub's for sale posting rules. I'm asking other moderators for input, but I'm inclined to either lock it, or move it to the official "For Sale" Forum if you don't post pictures and prices.I am free to ask for open offers, I don't have a set price in mind. Don't tell me how to sell my items and hook up members, p2
If I had a Mk4 I'd be looking to get that engine back...I see that someone has been looking for a Mk4 Wagon cargo cover... (once upon a time...) Since all my 2003 ALH wagons have had the bodies rot away, I've got lots of spare parts sitting around... Since I believe a price must be mentioned... how about a cargo cover... $50 or best offer... (for Wingnut, "best offer" might be a Tim Horton's...)... I've also got brakes, a timing belt kit (Continental), a spare engine, hoses, .205 injectors, alternators, perhaps a starter, serpentine belt and idler roller, driveshafts, wheel bearings, etc... also wagon tail light lenses/assemblies... (If someone needs good front struts - soon - and wants to replace the set before I have the car towed away... PM...) I'm located between Kingston and Brockville, but for small parts, I could bring them towards Toronto (or Montreal)...
If you still need one, I have one but I’m up in Severn bridgeAnyone have a spare black cargo cover for an MK4 jetta wagon kicking around? Looking to pick one up today between hamilton and Toronto if possible, but if not available today, fire me a PM and I'll arrange another time to grab it.
Found a set of brake pads.My MK5 was written off, so I will be posting parts as I come across them.....
Will have full BNIB JOM SS Coilovers once I dig them out, 19" AMG replica rims, various suspension parts, and whatever else I find.
Here's a few parts that I had easy access to.
Please PM about anything you're interested in as I don't want to pollute this thread with exchanges, prices, negotiations, etc.
New profile blades
2 full sets
OEM rubber trunk liner
OEM rubber winter mats with logo
Full OEM rubber set (above two combined)
SOLD -17mm bolt covers, removal tool, and security lock socket
Custom made SS304-20ga Mirror Polish Scan Guage panel - fits over the ashtray but does not block the ASR\EPS buttons between it and the shifter.
Can find other pics showing it installed if required. Would probably sell without the SGII since you can find the SGII cheaper to buy then I'd be willing to let it go for.
SOLDOEM 16s with winters - two tires are near mint, two are destroyed on the outsides
No curb rash or anything. Excuse the crude thread depth "measurement".
Rear Upper Shock Mounts
Rear control arm inner bushings
Front Strut Bearings
Oil Filter
Bosch Brake Pads - BE1107H & BE1108H (BNIB obviously)
Updated.
I have this exact Pela-clone extractor made by astro - has worked reliably for me for years... had to put one hose clamp around a rubber coupler to seal off a minor leak, but other than that has worked flawlessly. Also, Amit's a standup guy. GLWSMy MK4 Jetta ALH is sold now. I have the following items for sale.
1. TRW Rear Brake Caliper, Left/Driver's side, new in box
Manufacturer P/N BHS184
OEM Reference 1J0615423B
Asking $80Brake Caliper, Left, Rear (MK4 Jetta)
Rear left brake caliper for use on MK4 chassis Jetta models from mid 2000. This caliper is used with brake cables with a ball end. 41mm piston.roselandtech.ca
2. Astro Pneumatic Manual Fluid Extractor – 9.0 Liters, used, in excellent condition, very well built
Item # 7342
Asking $40Manual Fluid Extractor - 9.0 Liters | Astro Pneumatic Tools
• A large 9.0 Liter (2.35 gallon) capacity Fluid Extractor which can be used to extract several types of non-explosive liquids including: -Engine oil from c ...www.astrotools.com
PM me if interested.
Better prices on nozzles and pumps than anywhere else in Canada. 500ish mounted balanced and pop tested and you can keep your old nozzles to off set the cost.Any of you guys want in on this? @CanadianALH is working on organizing a Canadian order through @burpod to keep duty cost down. https://forums.tdiclub.com/index.php?threads/group-buy-powertdi-pl-injectors-260s.532157/
Right, and that's for .260's, naturally smaller ones will be even cheaperBetter prices on nozzles and pumps than anywhere else in Canada. 500ish mounted balanced and pop tested and you can keep your old nozzles to off set the cost.
Think hes only doing it for .260’sRight, and that's for .260's, naturally smaller ones will be even cheaper
price drop $160new never installed Muffler for a 2003 wagon, might fit others but have to check part#
$160 picked up or possible trade for good set of stock injectors for alh.
I might be interested in this. Would need price.Any of you guys want in on this? @CanadianALH is working on organizing a Canadian order through @burpod to keep duty cost down. https://forums.tdiclub.com/index.php?threads/group-buy-powertdi-pl-injectors-260s.532157/
Under 500. Which is a steal for full injectorsI might be interested in this. Would need price.
Well....I screwed up. I thought this was about his tuning but if there is an advantage them maybe ???Under 500. Which is a steal for full injectors
.260’s are what he tunes with. I could also get you a set of .230’s if you really wanted he can also work with those. They are really good and an awesome upgrade over tired old injectors.Well....I screwed up. I thought this was about his tuning but if there is an advantage them maybe ???