AdamWes
Active member
As the title states I am looking for a New or used 2.5" or 3" Downpipe for my ALH with a VNT17. Thanks!
Could you send me some pics and a price to my cell? Do you know the brand? 860-917-9300I have a new one, 2.5" 304 stainless steel.
I have 3 inch, go with the 2.5, thank me later. The 3 inch is hard to not rattle on something...it was cheaper than the 2.5 at the time...
Sent from my Pixel XL using Tapatalk
There's that too, it's a huge step from the turbo to the down pipe, and it's a royal PITA to get the too nut on the down pipe because of the pipe size...I have heard this, also that it is such a small opening at the manifold, going to 2.5 and then 3" is almost just as effective. Thanks for the insight!
There's that too, it's a huge step from the turbo to the down pipe, and it's a royal PITA to get the too nut on the down pipe because of the pipe size...
Sent from my Pixel XL using Tapatalk
That thought crossed my mind but at 2 or 3am with the oil lines bolted up and the pinch nuts tight I wasn't going to take it off for that and now wish I would have.I solved getting to the nuts by bolting the DP to the turbo befor mounting it to the head. I let the flex pipe do some of the work. Any other way and it would have been miserable to mount.