Judson
Veteran Member
Hey folks -
I have confirmed with Crutchfield and my own work that tapping in at the reverse light switch (for the backup camera) won't work - the signal wire needs to be 12v, and it only sends a signal to the relay, which then sends 12v to the reverse lights in the rear.
So, in the wire loom in the driver's sill, which wire is the one for the reverse lights? I believe it's the dark blue/black stripe one, but since I don't yet have a Bentley, I'm not sure.
(thought I had a line on a manual over at the 'tex but that fell through)
Thanks in advance,
Jud.
I have confirmed with Crutchfield and my own work that tapping in at the reverse light switch (for the backup camera) won't work - the signal wire needs to be 12v, and it only sends a signal to the relay, which then sends 12v to the reverse lights in the rear.
So, in the wire loom in the driver's sill, which wire is the one for the reverse lights? I believe it's the dark blue/black stripe one, but since I don't yet have a Bentley, I'm not sure.
(thought I had a line on a manual over at the 'tex but that fell through)
Thanks in advance,
Jud.