Turn signal switch

[quartersaw]

I went through hell, and back again, recently, with a bad clockspring/steering wheel wire harness. I finally resolved the issue.
Now, my turn signals can only be turned off manually, instead of the steering wheel doing this automatically.
Anyone have any ideas about this?

 

[jokila]

You have a bad turn signal switch. Replace.

 

[quartersaw]

You have a bad turn signal switch. Replace.

Does the switch have anything to do with the clockspring?

 

[mittzlepick]

Clockspring deactivates the blinker

 

[quartersaw]

Clockspring deactivates the blinker

Mechanically, or electrically? My blinkers work fine, it's just that I have to turn them off, manually.
If 'mechanically' is the answer, what am I looking at here? I can still hear a click inside the steering wheel, at the point where the blinkers should automatically turned off, but nothing is happening. I still have the steering column disassembled, and I can feel the 'click' in the blinker switch, but there isn't enough mechanical action, to turn the blinker off.

 

[mittzlepick]

Mechanically the doinker flips the doodad on the blinker stalk

 

[quartersaw]

Mechanically the doinker flips the doodad on the blinker stalk

OK. What are the part numbers of the Doinker, and Dodad?