Trouble removing MK4 starter

NSVW

New member
Joined
Feb 4, 2019
Location
Canada
TDI
2000 ALH
Hey guys,

I'm having starter trouble on my 2001 Jetta ALH, and cannot get it to budge; even after removing both the top and lower bolts holding the starter to the engine block.

I've tried to use a pry-bar to wiggle it loose, and have even used a chisel/hammer to try and get some play.

All I can think of is getting a torch involved at this point, but I've been fighting it for awhile and thought one of you guys might have a suggestion.

Thanks in advance!
 

NSVW

New member
Joined
Feb 4, 2019
Location
Canada
TDI
2000 ALH
Update; called my family guru and we figured the prybar was the weak point. Ended up pulling out a crowbar and cracked the corrosion (gotta love that Atlantic salt)!
 

jokila

Vendor
Joined
Dec 3, 2004
Location
Houston, Texas
TDI
2003 Jetta GLS, Manual
Use some brake grease on the mating surfaces when you reinstall. Seems like that would help for the future (which you hope to never have).
 
Top