I recently picked up a 2015 TDI Sportwagen as many others have over the past month or so. My hatch has a plastic bracket on it for holding the plate, but the dealer installed 4 oversize screws that were also too long and left a mark in the paint under each hole.
Does anyone know the correct screw size for this bracket? If that doesn't fit I'll probably just end up ordering a replacement one and doing it correctly. "There's always time to do it right the second time."
They also used those screws on the front plate bracket and mounted it about 1/4" low, but I can move those screws up and re-use them with no issue since it's sort of a big blank canvas up there.
Does anyone know the correct screw size for this bracket? If that doesn't fit I'll probably just end up ordering a replacement one and doing it correctly. "There's always time to do it right the second time."
They also used those screws on the front plate bracket and mounted it about 1/4" low, but I can move those screws up and re-use them with no issue since it's sort of a big blank canvas up there.