Rear brake sensor 2016 Touareg TDI

radunegru

Well-known member
Joined
Feb 23, 2013
Location
Middle Village NY ( NYC)
TDI
2013 Passat TDI
I was changing all rotors, pads and sensors on my 2016 T-reg and stumble upon a rear stuck sensor plug. I was not able to pull it out and maybe used exceed force and broke the plug attached to the harness. Does anyone have a part number for the harness? I installed the pads but without the sensor and i still have a warning message on the cluster.
 

TurboABA

Top Post Dawg
Joined
Jul 24, 2010
Location
Kitchener, ON
TDI
RIP-2010 Jetta 6spd 2014 Touareg Execline
Without any visuals, it's hard to see what you broke and where.
Typically, if you want your warning to go away, you need to "complete the circuit" between the two wires (splice them together, etc)
Just keep in mind that you will no longer be warned by the dash when your pads are low if you do this.
 
Top