gaddman
Veteran Member
- Joined
- May 8, 2006
- Location
- Southern Indiana
- TDI
- 06 Jetta (RC3, PD150 Injectors, GTB1749V, 2.5" Downpipe), 04 Touareg V10 (RC1)
I bought a 2009 Q7 in an Adblue no-start condition. The upper DEF tank is full. I have looked up all the ways I can find to reset it. I think it has the software update that allows it to reset on it's own with the key on for a while. But I've tried the VCDS adaptation group 80 thing and it never changes. The value in measuring block group 134 never changes from 11 to 100. If I were to go the delete route, do I need to get it out of the no-start situation first? I can't find it, but I thought I read somewhere that a tune would get it running, but the flashing Adblue 0 miles warning would remain. There are no codes stored for the Adblue system that I can see. I wouldn't mind spending a little money on the DEF system to get it running so I can assess what I've got...if that's possible.
Anyone have any experience troubleshooting? I have the fender liner out. There is crusty DEF stuff all over the bottom of the tank and the wiring and the liner. But it's dry. Looks like the sending unit/heater unit has been out before. I've unplugged everything and cleaned up the connections. What is the system looking for to be able to reset...float level, heater element, pump, pressure?
Thanks
Anyone have any experience troubleshooting? I have the fender liner out. There is crusty DEF stuff all over the bottom of the tank and the wiring and the liner. But it's dry. Looks like the sending unit/heater unit has been out before. I've unplugged everything and cleaned up the connections. What is the system looking for to be able to reset...float level, heater element, pump, pressure?
Thanks