Go to this thread, the link is in post #1 and you can download it all, not sure if you need Drop Box to download it, I have Drop Box and it downloaded easily and remains a live document on my PC so I can follow the links etc. This is the 2015 body and chassis but please note it does not cover the diesel engine, only the petrol engine.Yep - that's it. Wonderful.
May I ask where you located this disassembly info? It will help me to see the information that is not in the pic.
You did remove the two hidden screws and the two bolts per the drawing right?Wunderbar. Vielen Dank.
It's still no easy task to remove that bottom trim piece. The cubby tray did come out with the advice given. Now that all the screws are off, there are not hints as to where to release clips. One on the left side was pretty obvious - you can actually see it. The ones at the top of the trim piece are hidden and a variety of pulling strengths, directions of pull, and suddenness of pull are not getting me anywhere. I did find that pulling the steering wheel out as far as I can helps to see a bit more. Sheesh. I wish there were visible screws to remove instead of all of these hidden clips. I guess I'm old school.
And you removed the side panel right? That hides one of the screws. The diagram shows pulling outwards on the top part of the piece. Maybe a hair dryer to soften it a bit. I know where you're at on these plastic parts, they can be a real PITAYep, removed them all. The place it's stuck is in the upper right hand part of the diagram. No screws - just hidden tabs I can neither see nor get a separation tool into. I may take the risk and just yank and hope for the best. I doubt I can get the garage to over 65F [18C] this time of year, so the plastic is more brittle than I'd like it to be. Oy!
So I got one from Kerma, and my son is helping with the update. Seems 2.4 s the one you're recommending. He says there is a red and a white 2.4. He's having trouble getting MQB to go well. The unit they shipped says PF04 on it. I hope they didn't ship the wrong one! We'll se how this works.
Man I hope that's not a lost cause. Those and some sort of EGT are the main parameters I'm wanting to monitor. Adding coolant temp in the heating season, which is August to May for us.I lost the DPF PSI, DPF Soot Load thus far. There is another one that went missing too, but I cannot find exactly what is was that I'm missing, only a blank spot with zeros on the display. They are not even choices now in the list of parameters. I might try to re-update and see if that may fix the issue. If not, I going back down to 2.4
Haven't visited this thread since my last post, which was when I updated to 2.5.When I downgraded to 2.4, I have the DPF PSI, ADBLUE used, and all the other DPF parameters back. Seems that 2.5 has not been perfected yet.