Parting 99 NB TDI white/black/grey spun bearings

[davebugs]

Parting 99 NB TDI white/black/grey spun bearings Pittsburgh, PA area

Bought it this way.

Keeping 5 speed swap stuff and glovebox.

Complete car.

May get to parting ALH later. Not locked up, just main bearings spun.

Newer condenser, AC compressor.

Good front end all but bumper cover damage by RF wheel well.

Sunroof, PW, no holes in black heated leather, side mirrors good I think (knob broken off to adjust them), factory radio works, all good airbags, you get the idea.

I'll get pics up as soon as I remember how.

A few pics from towing it home on Pittsburgh CL
http://pittsburgh.craigslist.org/pts/3677466388.html


Prefer to sell to members and local folks (no shipping - especially large items).

Hood minor dent, drivers door dent. I have a silver door I was going to install with a manual window.

I have more pics now that it's inside and front bumper/fenders/headlights off.

If there is something you'd like to see PM me.

Looking for fair prices on stuff. I have no reason to keep NB parts other than glove box. And 5 speed swap stuff incase one of my auto's needs it. Heck if you wanted to remove the 5 speed swap stuff on my lift where the car sits now we may even be able to work that out.

Whats left of value will be Ebay or crushed.

 

[davebugs]

Attempt at posting pics. Now that it's inside it's hard enough to get far enough away to get whole front/side shots.

PM for any specific pics - I may have them already or I can take them.

Here is my try at posting pics:














A few others in my album.

 

[davebugs]

I'll attempt to keep this post updated with what is sold or bad.

glove box
cup holders
fog lights
interior switches (broken or sold except for sunroof stuff)
front bumper grille
LF fender inner liner
drivers white door dented, have a silver drivers door though.

Have a member that says he wants a bunch of stuff this week.

 

[upsbroke]

NB parts

Top plastic clamshell on interior steering column- held in by 2 screws?

 

[davebugs]

Top plastic clamshell on interior steering column- held in by 2 screws?

Have it but not off yet. I've undone the 2 small philips screws and have the bottom off for now.

I'll go see if just lowering the column or needing to remove the upper dash is required and drop you a PM.

Hopefully today.

These were popular items on MKIII's also. Amazing how many folks break these.

 

[upsbroke]

Loosen the steering column latch, lower the column and it should just pull out.

 

[davebugs]

Loosen the steering column latch, lower the column and it should just pull out.

Have it in hand.

PM coming.

 

[davebugs]

Some items ready to ship to members - mostly interior trim.

I'll be parting a lot more tomorrow.

Including intercooler and all that plumbing, perhaps very nice black leather seats, exterior mirrors, a very good grey headliner, tail lights, etc.

White front fenders off, headlights, everything from drivers door (switches bad or gone) panel better than most grey leather. Lower dash pieces (all the grey stuff other than glove box).

Normal Beetle 16" wheels - 3 in fair, one with marks - maybe a winter set?

Spare tire, toolkit, rear carpet nice, little cargo cover broken on R pivot but there(free to good home).

I hope to hit it hard tomorrow.

 

[davebugs]

Anyone especially local interested in an ALH that will need redone PM me.

Looks like atleast 2 main bearings spun, the rod bearings I checked were fine - nothing abnormal. Didn't pull cam because I screwed up the valve cover bolt back by the EGR valve so I'll wait until engine is out. It crapped out rather easily with the allen.

17?k I have 2 auto's so IP, injectors, nozzles, all that stuff does me no particular good so it may find it's way to Ebay.

Rods look good and engine not locked up. Don't know about pistons and cylinders. But I could likely sell as a longblock needing redone.

Otherwise in a month I'll likely be selling the head, rods, IP, etc, etc.

I'm still in the body/interior teardown stage to get the carcass out of my garage and to the scrap place.

 

[Countryboy07]

How much for the 11mm IP? Also, would you be interested in parting with the head rests?

-French

 

[davebugs]

How much for the 11mm IP? Also, would you be interested in parting with the head rests?

-French

Sorry I'm parting the 5 speed engine which is why the 10mm IP does me no good on my 2 auto TDI's(which require 11mm IP). Or the nozzles, etc.

Head rests will likely go with seats since they are in excellent condition.

 

[csstevej]

Pm sent.

 

[davebugs]

I believe all PM's replied. If I missed someone please PM again.

More items to be pulled and shipped this weekend.

 

[davebugs]

Parts to members shipping tomorrow.

Then I'll update sold list.

 

[davebugs]

Intercooler and hard turbo tube in RF wheel well shipped.

IP spoken for.

Was working on a bunch of little items for a member I'll have to get back to.

Most of interior out.

Radio and trunk/fuel release switched on Ebay with bids.

Engine may be removed this weekend then I'll decide about some parts - like the new looking EGR and already replaced vaccum pump, recently new looking AC compressor, condensor, dryer.

Possibly even injectors. I have 2 auto's so the 5 speed specific stuff I'll be quicker to part with. New looking universal parts that'll for my auto's I'll be looking for more money for or I'll just keep them.

In a month or so I may even have head, connecting rods, etc available.

I'll be parting more this weekend so PM me if interested in anything.

 

[davebugs]

Intercooler sold (but member has an issue - I'm trying to find my other one)

IP and injectors sold.

Some little stuff sold on Ebay(lightsLF window motor,hatch/fuel release,R tail, radio) assuming folks pay!

Nice Bosal downpipe, excellent seats, major suspension components available for those willing to pick up.

Grey console - shift boot seems decent and if I use the 5 speed swap stuff it'll be going into a Golf or Jetta so I can part with it. I have pics - boot is dirty but not worn much. Shifter top worn some on R side I believe but top is nice.

Pics available of whatever you're interested in.

 

[82racin]

Any idea if the left rear caliper and attached brake line going to the rear axle would be the same for a jetta and beetle?

If so i need one please!

 

[davebugs]

Any idea if the left rear caliper and attached brake line going to the rear axle would be the same for a jetta and beetle?

If so i need one please!

No idea. I'll likely just remove the whole beam late this week then perhaps tear it down.

Sure you want a 14 year old used brake line?

 

[DanEboy]

Is the front hood strut any good?
Do you have the trunk light/lens and a bit of the harness with it?
Battery hold down bracket and bolt?

 

[davebugs]

Is the front hood strut any good?
Do you have the trunk light/lens and a bit of the harness with it?
Battery hold down bracket and bolt?

I have all of it, all was good.. I'll have to make sure that trunk light didn't get away from me.

I'll PM you later today or tomorrow.

 

[davebugs]

I have a few boxes of small stuff orders I'm getting together.

I hope to finish the partout this weekend.

Local folks in the market for rad assy, complete head, seats, other bulky or heavy stuff PM me.

I'll try and make sure I've contacted everyone with what they needed by the end of the weekend.

I"ll be keeping a lot pf parts around but have the carcass sold and I'd like him to be able to pick it up early next week.

 

[davebugs]

ANyone local for hard to ship stuff?

cowl
newer Bosal complete downpipe
doors
have a nibble already on rear bumper cover but it's likely available
these seats are excellent black leather
hatch

Had hoped to finish today but some things are being stubborn - like clutch pedal.

Most ALH parts available, I'll ge tmore serious about it after the carcass is gone.

I owe some folks pics about fuel filter area, getting togethers orders for odds & ends for members.

IP - part of connector is broken. Clean, non leaking 10mm pump.

Turbo/exh manifold seems good

 

[davebugs]

I owe a fem members some little parts.

I apologize. Going back to take com ecollege classes after 50 and a shot to the head took more effort than I would have thought, and that was with dropping one of the 3 classes.

Anyways the car is parted, this weekend the fella is coming to get the carcass - or I'll hack it into a Cmas display liek I wanted to do with a 73 Beetle I parted a year or so ago.

IP, INjectors, wiring connectors for front end lights, all mirrirs, radio, HVAC panel are all gone off the top of my head.

Still EXCELLENT balck leather heated seats - but no - I won't ship them or sell headrests seperate. Carpet, mats.

Mildly used EGR, I'll start on engine really next week, alternator is stuck in the bracket.

Compelte head? Possible but I won't give it away since I have 2 ALH's - but I take care of them very well so the odds of me needing a head are slim.

VNT15 seems good, AC compressor is new as is condensor.

Anyways as soon as the carcass is gone or hacked up I'll get back to folks abotu the parts they inquired about. Most have been pulled and setting in boxes for a week or two waiting on me to conform what folks want , price and ship.

Sorry for the delay.

OEM headlights available, license plate lights and backup. Most others gone or spoken for.

All dash cover pieces, aribags, complete steering column, Ebrake assy, all 4 black seat belts, etc.


WIper arms, ECU, I picked it rather clean.

 

[ourpobox]

Do you still have the headlights? I need a driver's side headlight. Would consider taking both if the price is right. How much, shipped to 22551?

 

[davebugs]

o.k. folks I still have a lot of parts form this partout.

Including all 4 brake calipers, I beleive all the exterior lights, black leather seats, engine parts (IP, head, injectors gone) EGR, vacuum pump look almost new.

Dash plastic, grey console, all interior door panels(black leather interior so door panels Black n Grey leather)

I dropped the rear axle assy and the front subframe/Kframe and the only thing sold off that stuff is the steering rack. So I have struts, shocks, springs, calipers, axle beam, Kframe(when my LCA nut was an issue on my Golf I jsut replaced my Kframe), LCA's.

Fuel lines, coolant lines, AC lines, I picket it clean!

I also have parts left from a 99.5 Jetta partout - black doors, tan leather door cards, AFP engine parts and a matching 5 speed and an auto.

Just starting a 2000 Jetta 2.0 auto partout. SOld hood, bunoer cover, rad support yesterday. Car has a broken timing belt and not that nice of a car so I'm not fixing it.

ALso I bought an 02 Jetta ALH/auto last week. Undetermined if it's fixable or not. Bought it thinking of parting and keeping some stuff incase I need it. But now my long time VW mechanic thinks it may be fixable. Seller thought it has a bent crankshaft.

Any questions ask. I already have a LOT of pics since I Ebay stuff when I have time. Always prefer to sell to a member.

 

[BigJare]

A/C brackets

You have a pm

Thx

 

[INDRIDCOLD]

hi , i am interested in the seatbelt buckle the piece attached to the seat on driver side. also the console lid. how are the two front door panels? how much for these things i am in 34974

 

[DanEboy]

PM sent.