Hi I'm working on a customer's 2013 Volkswagen Jetta, (CJAA) check engine light and some other stuff. scanned for codes, came out with p2015, went though direct hit's trouble shooting, had proper power and ground on pins you're supposed to. replaced intake manifold and intake runner flap motor. noted test drove vehicle probably like 30 miles, in 10 mile increments. I drove it twice and QC drove it once, when qc drove it the check engine light came back on scanned and found the same code, looked through all-data and direct hit, to see if there was a reset procedure, couldn't find anything, went foreman went through and found a reset/ relearn function on his scan tool, we tried that. the code came back on, we found diesel-geek, makes a bracket. we installed that and reset/relearned again. noted check engine light doesn't come back on immediately but if you scan for codes, the code comes back immediately, also have a new one. p2006. any help will be appreciated,
Thanks,
Dirtymax
Thanks,
Dirtymax