Ontario Karma thread

[trailhead]

Wheel and bag mk4 05

I'm thinking of placing a watermelon on this and deploying it. Am I giving myself bad karma if I don't first offer it for sale/trade or free?

UPDATE; Sadly, I found a home for this so no BOOOOM!
Good news; I've karma in spades now!

 

[mjhandy]

i think i have a right rear door window motor.

 

[strikeraj]

i have a large rad fan that requires repair, just don't have time to do
rusty LCA, rusty rear springs, stock front strut and rear shock pulled from a suspension refresh

also have a pair of front brake rotors and pads with lots of material left pulled from a pontiac sunfire

 

[MerelyKarma]

Might as well post here. I do car interior work (upholstery), so if you guys/gals have any blown seams I'm happy to fix them.


Basically if nothing but thread needs replacing, I just let me know.


I'm in Toronto,

[Edit] email me if you need any interior help, put "TDI Club Member" as the subject (to differentiate you from the normal mass of emails) Stuart at Insidejobtoronto dot com


I dont visit here a lot so PM's might take a while for me to reply too

 

[skatanic]

I have old struts (KYB's) that have some life left in them.

 

[vwmikey99]

FREE: mk4 jetta gauge cluster 2.0

gone!!

 

[2ManyKMfor1Tank]

Free to a good home:
Have a bunch of stuff to give away.
Have a set of California shutters I can't use. One or 2 broken but repairable slats, otherwise in good shape.

An electric Dryer, Kenmore Heavy duty, works well.

Set of Front tan leather heated seats, obvious wear on the drivers, passengers currently buried in snow.

 

[deflux]

I have the stock double din radio from my 04 if anyone wants it, i'm in Niagara, often in Hamilton and Mississauga. I don't have the code for it.

 

[Purch]

VCDS (HEX-USB+CAN), Pela 6000, Mk4 tranny plug (17mm Allen)

Always happy to help out.

Located in Uxbridge

 

[Mark Dempter]

I Have VCDS Lite (Registered) and TDI TB Tools, Alternator Socket, IP Socket, PELA oil drain, Wheel bearing installer / remover, shop press, Hoist. Willing to lend to any TDIClub locals. I am located in Caesarea Ontario.

 

[Purch]

^^^great to know, Mark. I regularly travel between Uxbridge and Janetville, so Caesarea is very convenient!


Sent from my iPhone using Tapatalk

 

[macoombi]

I've never heard of Caesarea. Google mapped it to find out it's just outside of Port Perry. My brother lives there and I grew up in Ajax.

Anyway, I'm in Ottawa (Barrhaven) and I've got the Metalnerd strut spreader tool, triple square bits, Dieselgeek flywheel holding tool and I'm picking up a Harbor Freight engine support bar to do my clutch and timing belt this weekend. I might be buying the timing belt tools and maybe even a VCDS later this spring (if it ever comes) for the timing belt job.

 

[mrrhtuner]

I've never heard of Caesarea. Google mapped it to find out it's just outside of Port Perry. My brother lives there and I grew up in Ajax.

Anyway, I'm in Ottawa (Barrhaven) and I've got the Metalnerd strut spreader tool, triple square bits, Dieselgeek flywheel holding tool and I'm picking up a Harbor Freight engine support bar to do my clutch and timing belt this weekend. I might be buying the timing belt tools and maybe even a VCDS later this spring (if it ever comes) for the timing belt job.

I lived close by, in Nepean back in 2011-12

Miss Ottawa daily

 

[Brooklin Express]

I have a sunroof motor from a 2004 jetta, if anyone needs one.

 

[mecne]

Need some Karma

Anyone located in Toronto and to the East have a MetalNerd " Universal Sprocket Buster (TM) Counterhold Tool " that I might be able borrow for a week or so?

Mike

 

[redlinedave]

Free or beer
Vanagon T3 1985 rear bench seat, also a kitchen for the van. Google country homes van to see the type. Im no good at uploading photos

 

[slickkhan]

if anyone planning an intake cleaning on their alh i have a new manifold gasket they can have.
also just got micro-can vcds if anyone needs a scan.

 

[IAMCIRE]

Free golf parcel shelf. The strings are broken. Goes in the garbage coming Thursday if no one wants it.

 

[macoombi]

Got a few ALH (mostly) things here in Ottawa (Barrhaven) if anybody needs to borrow them.
- Metalnerd ALH Timing Belt Tools
- Harbor Freight Engine Support Bar
- Diesel Geek Flywheel holding tool
- Metalnerd Strut Spreader bit
- Metalnerd Triple Square bit set
- Metalnerd Alternator sockets
- an ALH Rear Main Seal that I didn't need when I did my clutch

 

[mk5DirtyDiesel]

I have all the tools from dieselgeek to change the timing belt on a BRM, located in Embrun.

 

[dieselsipper]

Free to pick up or you pay for shipping
mk4 jetta, oem, all chrome front grill. Was scratched and damaged from shipping, so the vendor sent me a replacement. I installed the replacement. I took my old grill apart to salvage the sub-piece(the one that snaps to the car) then installed the all chrome pieces from the scratched and damaged unit. Will come with two VW inserts, one was my old one 360k KM so its is pitted, and the scratched one. The scratches aren't too bad. This is a genuine VW part made in germany. I cam email pics if interested.

 

[Ptplayers]

Free , VW Monster winter mats for 2012+ jetta

Only used them a month before car was written off .

 

[Ptplayers]

Free , VW Monster winter mats for 2012+ jetta
Only used them a month before car was written off .

They are now gone .

 

[j_martell]

This thread is awesome....while I have no hard parts to offer, I'm a car geek through and through....and up to lending a hand to anyone who needs it.....located in Elora, but I work in the tri-cities (k-w/cambridge)....traveling is a non issue....the best way to learn is hands on.

Keep it going!!

 

[Aviator69]

Great thread idea... I don't have anything particularly or part-icularly useful to offer at the moment but that may change once I get my ride...

 

[993cc]

Used OEM shocks and struts for MKlV Jetta.

Available free if anyone wants them. They were taken off my 2003 wagon at approx. 70,000 km. They should still have some life.
Pick up in Ottawa. Contact: kirchner(dot)bob(at)gmail.com

 

[j_martell]

Available free if anyone wants them. They were taken off my 2003 wagon at approx. 70,000 km. They should still have some life.
Pick up in Ottawa. Contact: kirchner(dot)bob(at)gmail.com

S**t....too bad your so far away.....

 

[the_$i1v3r0n3]

Have Microcan to offer in etobicoke. will have brm timing tools by end of week.

anyone have an engine support thingy that you put on the fenders that i may be able to borrow for a weekend?

 

[redlinedave]

^^^^ yep^^^

 

[the_$i1v3r0n3]

^^^^ yep^^^

You think I can borrow her when I have a bit of time? I have school and work for now full time so can't exactly do it until Christmas vacation.