Ontario Karma thread

[redlinedave]

a Karma thread

On Samba they have a Karma thread
people post items they are willing to lend or give for free

I'll start

If anyone needs to borrow a Engine support or brake piston tool Ive got one to lend

cheers all

 

[Tdi Kick]

Hey, I'm in!

Great idea... I'm all about helping the good community.

I've got ALH/AHU timing tools...

 

[tassolake]

Excellent Idea, I have BRM timing tools, piston caliper tools, triple square sockets, engine hoist (and stand), a big A$$ vacuum pump (24 gallons) and a full blacksmith shop if there is something that needs to be heated and hit with a hammer.....

 

[Johhny04]

Great idea.

I got VCDS and a vacuum pump for oil changes.

 

[RDA3440]

Nice!

VCDS full kept in the car, and I'm often in PTBO and the GTA. Ross-Tech legit/full VCDS + Ebay cables (for the Window mod and other stuff).

Access to hoist / emergency repair services in North York (almost any time of day or night) with a VW mechanic.

Lots of spare bits.

Short term loaner

 

[mecne]

Echoing "Great Idea"

Here's my list ;

VCDS for Pre 2005 with me at all times ..
Engine Support
Transmission scissor jack
Might Vac
Brake Disc Compressor
Assorted MK4 parts in the shed and garage usually .

 

[Uberhare]

I have a hoist....but it stays at my place.

 

[craig01b]

vcds, tb tools for alh....brake tools, engine support...just post and ask.

 

[ss04vv]

Perhaps the more efficient way to do this would be to have a mod summarize all the people who are willing to lend out tools into a list that is sorted by the tool your after, and list the people who are willing to lend it below so that someone could use the sticky as a reference and see someone in the area who has the tool they need to borrow?

 

[dwfdiesel]

I love you guys but I don't have any tools to lend it never broke down yet.

 

[OhMagoo]

um...erm...well...I don't got any tools or specific TDI skills, but I could take one at a time for a ride in the mistress and give ya a different perspective of drivers....

 

[redlinedave]

Looking for Metal nerds alt pulley removal tool

Alternator shop ordered wrong pulley, I have the correct one now but really dont want to pull the alternator again to swap the pulley

 

[redlinedave]

Ive got a small rad fan Mk4 if anyone needs

 

[redlinedave]

just ordered tool from Metalnerd so it'll be here to lend

 

[amacd]

I'm in Petawawa durring the week and quinte area on weekends. Just send an e-mail if u need anything.

-VCDS
-REAR CALIPER TOOL
-MIGHTY VAC
-FRONT CALIPER HELI-COIL SET (TO REPAIR STRIPPED PIN THREADS)
-110V FLUX CORE BUZZ BOX



Andrew

 

[bta 120]

I have a KEY-USB
Dual K VAG-COM
KC152776 Rev. C
If needed.

 

[Ptplayers]

I have 4 Chinese mud flaps from ebay for a 2012 jetta that i did not have a chance to install if anyone wants them for free in GTA .

 

[Scorny]

Need gone ASAP(picked up)...
Two ticket for free to go see the Marlies vs The Bulldogs tomorrow Saturday Feb. 2nd 3:00pm at the RICOH coliseum.

I will post this somewhere else after a few hours if they are not spoken for,I don't want them going to waste.
Thanks.

Text number below to see if its still available...

six four seven 970 2875.

 

[IAMCIRE]

Just got a HEX-COM VCDS if needed.

 

[redlinedave]

small rad fan gone

 

[Adam635]

VCDS (Hex-Com-USB), Master brake piston tools, some triple squares and the likes.

Located in the Kingston Area.

 

[vacin]

Ive got a small rad fan Mk4 if anyone needs

did you receive my envelope ?

 

[trailhead]

Free; From my mk4 jetta-
I put 13,000km on these before upgrading. They're the cheapest 280mm rotors from Parts Source. You'll want to turn 'em before you turn 'em.

If you don't want them the scrap man does!

GONE

 

[deezlrooz]

GONE TAKEN "front 20/tdi mk4 spindle with suspension break calliper and disc on it. nothing wrong with it bearing are good as well. FREE

 

[graeme20]

Jetta Wagon (or Passat) Roof Cross Bars - Free

Sold.....


Yup - yours if you want it. Worked fine on my '03 wagon for the past few years. Some duct tape on the ends, & bars are rusting a bit....but hey - they're free. Located in Brooklin.

 

[Wingnut]

Yup - yours if you want it. Worked fine on my '03 wagon for the past few years. Some duct tape on the ends, & bars are rusting a bit....but hey - they're free. Located in Brooklin.

PM sent.

 

[Silver02TDI]

I have a wheel bearing from an MKIII if anyone wants it. Brand new, never installed...

 

[seth1065]

very cool I may need to copy this for the NJ club

 

[Hydro3]

Have a rear wiper from a mk4 Golf, only used for a few month, free to whoever wants it.

 

[redlinedave]

very cool I may need to copy this for the NJ club

Carma is good