I just been through the replacement of the seels on both sides of the oil cooler on a bew mk4 golf.
Torquing is indicated to be at 25Nm. I have lubded the seals...with oil...thought it's an oil cooler.
Is it normal that the cooler still feels loose when trying to rotate it side ways after beeing torqued ?
On the bottom cap it says 25Nm + 5.
+5 what ???
Torquing is indicated to be at 25Nm. I have lubded the seals...with oil...thought it's an oil cooler.
Is it normal that the cooler still feels loose when trying to rotate it side ways after beeing torqued ?
On the bottom cap it says 25Nm + 5.
+5 what ???