P2B
Top Post Dawg
Forum rules require you post an asking price.
Official Ontario stuff for sale thread
- Thread starter Wingnut
- Start date
1854sailor
Resident Curmudgeon
This thread is not in the Private TDI Items For Sale/Wanted Forum and, as such, is skirting TDIClub's for sale posting rules. I'm asking other moderators for input, but I'm inclined to either lock it, or move it to the official "For Sale" Forum if you don't post pictures and prices.
Last edited:
My vote would be to just move it to the for sale section, if there has to be a change.
(Why should I, a Saskie, “put in my oar,” you ask? Well I might have need of this thread soon, may be moving to Ontario for a while.
)
(Why should I, a Saskie, “put in my oar,” you ask? Well I might have need of this thread soon, may be moving to Ontario for a while.
)
P2B
Top Post Dawg
My vote would be to enforce the same rules here (and in the Official Ontario CARS FOR SALE thread) as apply in the Classifieds section.
https://forums.tdiclub.com/index.php?media/20230827_174524-jpg.155060/
https://forums.tdiclub.com/index.php?media/20230827_170715-jpg.155061/
Fs In Ottawa Jetta A4 intake manifold clean and Side mounted intercooler clean.
Came off of a 2003 Jetta TDI
Both in good condition looking for $25 for the pair
Will not ship pickup only
https://forums.tdiclub.com/index.php?media/20230827_170715-jpg.155061/
Fs In Ottawa Jetta A4 intake manifold clean and Side mounted intercooler clean.
Came off of a 2003 Jetta TDI
Both in good condition looking for $25 for the pair
Will not ship pickup only
Last edited:
krazykipa
Veteran Member
Set of 4 new, unused center caps for VW Avus wheels, p/n 1J0601149B. The blue is just a protective film.
$40 for the set, located in Streetsville, Mississauga or can also meet in Perth (near Ottawa).
$40 for the set, located in Streetsville, Mississauga or can also meet in Perth (near Ottawa).
ymz
Top Post Dawg
- Joined
- May 12, 2003
- Location
- Between Toronto & Montreal
- TDI
- 2003 Jetta TDI Wagon, 2003 Jetta TDI Wagon
I see that someone has been looking for a Mk4 Wagon cargo cover... (once upon a time...) Since all my 2003 ALH wagons have had the bodies rot away, I've got lots of spare parts sitting around... Since I believe a price must be mentioned... how about a cargo cover... $50 or best offer... (for Wingnut and other "good guys", "best offer" might be a Tim Horton's...)... I've also got brakes, a timing belt kit (Continental), a skid plate and supports, a spare engine, hoses, .205 injectors, alternators, perhaps a starter, serpentine belt and idler roller, driveshafts, wheel bearings, etc... also wagon tail light lenses/assemblies... (If someone needs good front struts - soon - and wants to replace the set before I have the car towed away... PM...) I'm located between Kingston and Brockville, but for small parts, I could bring them towards Toronto (or Montreal)...
Last edited:
ymz
Top Post Dawg
- Joined
- May 12, 2003
- Location
- Between Toronto & Montreal
- TDI
- 2003 Jetta TDI Wagon, 2003 Jetta TDI Wagon
>> If I had a Mk4 I'd be looking to get that engine back... <<
Ha... that engine had the turbo die just after the car passed 1,000,000 km... I just got back on the 401 heading to the Big Cabbage... smoked away until I got to Belleville and rented a car... The police eventually flagged me down... they had reports of a car on fire driving on the highway... looked up a rental place for me and accompanied me into Belleville... (I do still have the engine I got from Craig B. (in Guelph) sitting on the floor in the garage...)
PS - it's been years since I went car shopping... exhausting...
Ha... that engine had the turbo die just after the car passed 1,000,000 km... I just got back on the 401 heading to the Big Cabbage... smoked away until I got to Belleville and rented a car... The police eventually flagged me down... they had reports of a car on fire driving on the highway... looked up a rental place for me and accompanied me into Belleville... (I do still have the engine I got from Craig B. (in Guelph) sitting on the floor in the garage...)
PS - it's been years since I went car shopping... exhausting...
Ackilys
Vendor , w/Business number
If you still need one, I have one but I’m up in Severn bridge
pnyknight
Veteran Member
- Joined
- Nov 22, 2006
- Location
- Scarborough, Ontario
- TDI
- '02 Jetta 1.9 GLS, reflex silver (pseudo wrecked Apr10/13); 2013 Candy White Jetta TDI
Either car could make the trek half way no?
TurboABA
Top Post Dawg
- Joined
- Jul 24, 2010
- Location
- Kitchener, ON
- TDI
- RIP-2010 Jetta 6spd 2014 Touareg Execline '14 A6 Technik S-line
Found a set of brake pads.My MK5 was written off, so I will be posting parts as I come across them.....
Will have full BNIB JOM SS Coilovers once I dig them out, 19" AMG replica rims, various suspension parts, and whatever else I find.
Here's a few parts that I had easy access to.
Please PM about anything you're interested in as I don't want to pollute this thread with exchanges, prices, negotiations, etc.
New profile blades
2 full sets
OEM rubber trunk liner
OEM rubber winter mats with logo
Full OEM rubber set (above two combined)
SOLD -17mm bolt covers, removal tool, and security lock socket
Custom made SS304-20ga Mirror Polish Scan Guage panel - fits over the ashtray but does not block the ASR\EPS buttons between it and the shifter.
Can find other pics showing it installed if required. Would probably sell without the SGII since you can find the SGII cheaper to buy then I'd be willing to let it go for.
SOLDOEM 16s with winters - two tires are near mint, two are destroyed on the outsides
No curb rash or anything. Excuse the crude thread depth "measurement".
Rear Upper Shock Mounts
Rear control arm inner bushings
Front Strut Bearings
Oil Filter
Bosch Brake Pads - BE1107H & BE1108H (BNIB obviously)
Updated.
I haven't bothered to go to my parent's place yet to take pictures of the bulky stuff like the AMG rims or the coilovers.
If there's interest, I'll put that effort into it.
ALH AND PD PARTS
have a couple things for sale from a alh and Bhw engine
2 alh injection pumps, good working Condition
alh turbo, vanes slightly sticky and fins scraped, no shaft play or oil blow by when in use
set of continental winter tires on steel rims for A 2005 passat, tires great condition
alh valve cover, brand new oem paid 450 for that
3 tested and cleaned pd injectors from Bhw, sealed and packaged
alh intercooler
1 alh cylinder head less then 300k on it
complete alh engine, block has piece chipped in corner wiIl either need to be welded or good for parts (piston, crank, head, etc.) engine has 305k on the dot, ran perfectly fine no issues car was totaled in a wreck
Also have a alternator and ac compressor and a brand new ina alternator pulley all for mk4 Jetta but also compatible with other Tdi’s I believe
MAKE AN OFFER
pick up in brampton
have a couple things for sale from a alh and Bhw engine
2 alh injection pumps, good working Condition
alh turbo, vanes slightly sticky and fins scraped, no shaft play or oil blow by when in use
set of continental winter tires on steel rims for A 2005 passat, tires great condition
alh valve cover, brand new oem paid 450 for that
3 tested and cleaned pd injectors from Bhw, sealed and packaged
alh intercooler
1 alh cylinder head less then 300k on it
complete alh engine, block has piece chipped in corner wiIl either need to be welded or good for parts (piston, crank, head, etc.) engine has 305k on the dot, ran perfectly fine no issues car was totaled in a wreck
Also have a alternator and ac compressor and a brand new ina alternator pulley all for mk4 Jetta but also compatible with other Tdi’s I believe
MAKE AN OFFER
pick up in brampton
GP_RZ
Veteran Member
new never installed Muffler for a 2003 wagon, might fit others but have to check part#
$160 picked up or possible trade for good set of stock injectors for alh.
$160 picked up or possible trade for good set of stock injectors for alh.
Last edited:
Johhny04
Veteran Member
SOLD.
Last edited:
Speedmaster_102
Veteran Member
Akebono Front and Rear Pads
Front - EUR1107
OEM CROSS REF#
1K0698151E, 3C0698151A, 5K0698151, 8J0698151
Rear EUR1456
OEM CROSS REF# 5K0698451, 5K0698451C, 5K0698451A
Asking $150 for the set.
Front - EUR1107
OEM CROSS REF#
1K0698151E, 3C0698151A, 5K0698151, 8J0698151
Rear EUR1456
OEM CROSS REF# 5K0698451, 5K0698451C, 5K0698451A
Asking $150 for the set.
Last edited:
amit9
Veteran Member
My MK4 Jetta ALH is sold now. I have the following items for sale.
1. TRW Rear Brake Caliper, Left/Driver's side, new in box
Manufacturer P/N BHS184
OEM Reference 1J0615423B
roselandtech.ca
SOLD!
2. Astro Pneumatic Manual Fluid Extractor – 9.0 Liters, used, in excellent condition, very well built
Item # 7342
www.astrotools.com
Asking $40
PM me if interested.
1. TRW Rear Brake Caliper, Left/Driver's side, new in box
Manufacturer P/N BHS184
OEM Reference 1J0615423B
Brake Caliper, Left, Rear (MK4 Jetta)
Rear left brake caliper for use on MK4 chassis Jetta models from mid 2000. This caliper is used with brake cables with a ball end. 41mm piston.
roselandtech.ca
2. Astro Pneumatic Manual Fluid Extractor – 9.0 Liters, used, in excellent condition, very well built
Item # 7342
Manual Fluid Extractor - 9.0 Liters | Astro Pneumatic Tools
• A large 9.0 Liter (2.35 gallon) capacity Fluid Extractor which can be used to extract several types of non-explosive liquids including: -Engine oil from c ...
www.astrotools.com
PM me if interested.
Last edited:
I have this exact Pela-clone extractor made by astro - has worked reliably for me for years... had to put one hose clamp around a rubber coupler to seal off a minor leak, but other than that has worked flawlessly. Also, Amit's a standup guy. GLWSMy MK4 Jetta ALH is sold now. I have the following items for sale.
1. TRW Rear Brake Caliper, Left/Driver's side, new in box
Manufacturer P/N BHS184
OEM Reference 1J0615423B
Asking $80Brake Caliper, Left, Rear (MK4 Jetta)
Rear left brake caliper for use on MK4 chassis Jetta models from mid 2000. This caliper is used with brake cables with a ball end. 41mm piston.
2. Astro Pneumatic Manual Fluid Extractor – 9.0 Liters, used, in excellent condition, very well built
Item # 7342
Asking $40Manual Fluid Extractor - 9.0 Liters | Astro Pneumatic Tools
• A large 9.0 Liter (2.35 gallon) capacity Fluid Extractor which can be used to extract several types of non-explosive liquids including: -Engine oil from c ...
PM me if interested.
dabest
Well-known member
New Zero start engine heater 1500 watts with accessories was going to install it on my golf, but the car was written off, so no need for it anymore asking 230.00
Last edited:
Any of you guys want in on this? @CanadianALH is working on organizing a Canadian order through @burpod to keep duty cost down. https://forums.tdiclub.com/index.php?threads/group-buy-powertdi-pl-injectors-260s.532157/
CanadianALH
Veteran Member
Better prices on nozzles and pumps than anywhere else in Canada. 500ish mounted balanced and pop tested and you can keep your old nozzles to off set the cost.
Right, and that's for .260's, naturally smaller ones will be even cheaper
Think hes only doing it for .260’s
GP_RZ
Veteran Member
price drop $160new never installed Muffler for a 2003 wagon, might fit others but have to check part#
$160 picked up or possible trade for good set of stock injectors for alh.
Prince
Active member
I might be interested in this. Would need price.
CanadianALH
Veteran Member
Under 500. Which is a steal for full injectors
Prince
Active member
Well....I screwed up. I thought this was about his tuning but if there is an advantage them maybe ???
CanadianALH
Veteran Member
.260’s are what he tunes with. I could also get you a set of .230’s if you really wanted he can also work with those. They are really good and an awesome upgrade over tired old injectors.
burpod
teh stallionz!!1
- Joined
- Nov 27, 2004
- Location
- cape cod, ma
- TDI
- 82 rabbit vnt ahu, 98 jetta vnt ahu, 05 parts car, 88 scirocco.. :/
well, i can tune for anything, but .260s is my preferred upgrade size and they can get stellar mpg when the hardware/tune is all up to snuff. easily way better than stock performance. would also be easiest for a group buy like this to keep it simple and get all the injectors of the same size, same pop pressures.