Official Ontario stuff for sale thread

TurboABA

Veteran Member
Joined
Jul 24, 2010
Location
Kitchener, ON
TDI
RIP-2010 Jetta 6spd 2014 Touareg Execline
My MK5 was written off, so I will be posting parts as I come across them.....
Will have full BNIB JOM SS Coilovers once I dig them out, 19" AMG replica rims, various suspension parts, and whatever else I find.
Here's a few parts that I had easy access to.

Please PM about anything you're interested in as I don't want to pollute this thread with exchanges, prices, negotiations, etc.

New profile blades
2 full sets



OEM rubber trunk liner


OEM rubber winter mats with logo


Full OEM rubber set (above two combined)


SOLD - 17mm bolt covers, removal tool, and security lock socket


Custom made SS304-20ga Mirror Polish Scan Guage panel - fits over the ashtray but does not block the ASR\EPS buttons between it and the shifter.
Can find other pics showing it installed if required. Would probably sell without the SGII since you can find the SGII cheaper to buy then I'd be willing to let it go for.



SOLD OEM 16s with winters - two tires are near mint, two are destroyed on the outsides
No curb rash or anything. Excuse the crude thread depth "measurement".








Rear Upper Shock Mounts


Rear control arm inner bushings


Front Strut Bearings


Oil Filter


Updated.
 
Last edited:

phantom1260

Veteran Member
Joined
Aug 15, 2017
Location
Brampton, Ontario
TDI
2010 Jetta TDI
Parting out two 2010 Jetta TDI. Both are black. One has leather seats and the other is cloth.

I also have a Diesel Geek Skid Plate

I was doing a DSG swap but am just parting both the cars out now.

So I already have the following removed

CV shafts / Axles
Starter
Intake Box
Two DSG Transmissions - 1 needs a mechatronic. The other one I cracked the housing when installing but have gotten it welded.
1 of them has newer rear calipers
Diesel Geek Skid Plate
Brand New LUK DMF - I bought it to swap while I was doing the DSG but never installed it.

Let me know if you are looking for something specific.

I was able to get the emissions recall done on the donor car before I removed the transmissions it all those emissions parts are brand new from the dealer. DPF, Exhaust Valve etc
Still have the Diesel Geek Panzer Skid Plate if anyone is interested.
 

phantom1260

Veteran Member
Joined
Aug 15, 2017
Location
Brampton, Ontario
TDI
2010 Jetta TDI
I got a PM from someone locally interested. My preference would be to sell locally. If that does not go through I'll figure out how much shipping will be.
 

phantom1260

Veteran Member
Joined
Aug 15, 2017
Location
Brampton, Ontario
TDI
2010 Jetta TDI
Adding some pictures if anyone is interested. I have all the hardware as well except for the riv nuts and the threaded rod both of which can be sourced at home depot at minimal cost.









 

igiveup

Veteran Member
Joined
May 2, 2010
Location
Mississauga, Ontario
TDI
2005 Passat, 2009 Jetta
FS - CBEA ECU
ECU from a 2009 Jetta, did not have the emissions fix done on it. Not exactly sure what that changes in the coding. Can include complete wiring harness.
$100obo
 
Last edited:

Tartrus

Member
Joined
May 5, 2018
Location
Canada
TDI
Mk4 BEW Jetta
I have 2 driver's side brake hoses for a mk4 jetta. Moving out of province so if you want em and are willing to come to the KW area I will give them to you for free
 

bigivn

New member
Joined
Jan 13, 2022
Location
ON
TDI
Jetta
I am the original registered owner of this USB based HEX+CAN interface cable. Unit is in perfect working condition, actual unit shown. Now is the time to ask any questions. Asking $100 including regular post in Canada only. Payment by EMT before I ship. Cheers
 

Johhny04

Veteran Member
Joined
Feb 21, 2006
Location
Markham, Ontario
TDI
2003 Jetta TDi
I'm considering parting out my 02 Jetta. Drivers side front wheel bearing and CV axle failed. While not hard or expensive to replace, I've spent too much money on this car and have had enough. It'll likely need a couple of other bits too, although I have quite an extensive list of new parts on it in the last 2 years. Engine has 418k and a new mahle turbo installed last year, ac blows cold. Car can be heard running before removing engine. Body is ok, underbody is clean, but some body panels are starting to rust given the age. In its current condition it's not driveable. I have the whole knuckle apart and the axle is off the car. I could put the knuckle back on to roll the car, but as mentioned, not driveable and needs a tow. In its current state I'm not sure what it's even worth, hence considering a part out. If anyone is interested in it complete, or wants parts, let me know so I can decide which route to go, and based on that I'll see if it's worth giving it another chance or letting it go, part out or complete

PM is best

Thanks
Trying to send a PM but it says your profile is private.
 

P2B

Top Post Dawg
Joined
Jan 11, 2006
Location
Toronto & Muskoka, Canada
TDI
2002 Jetta, 2003 Jetta, 2003 Jetta Wagon
I'm considering parting out my 02 Jetta. Drivers side front wheel bearing and CV axle failed. While not hard or expensive to replace, I've spent too much money on this car and have had enough. It'll likely need a couple of other bits too, although I have quite an extensive list of new parts on it in the last 2 years. Engine has 418k and a new mahle turbo installed last year, ac blows cold. Car can be heard running before removing engine. Body is ok, underbody is clean, but some body panels are starting to rust given the age. In its current condition it's not driveable. I have the whole knuckle apart and the axle is off the car. I could put the knuckle back on to roll the car, but as mentioned, not driveable and needs a tow. In its current state I'm not sure what it's even worth, hence considering a part out. If anyone is interested in it complete, or wants parts, let me know so I can decide which route to go, and based on that I'll see if it's worth giving it another chance or letting it go, part out or complete

PM is best

Thanks
It's worth more if it's driveable. I have a used knuckle and axle you can have cheap.
 

dataiv

Veteran Member
Joined
Feb 12, 2005
Location
Ottawa, ON
TDI
2015 Golf Wagon TDI 6MT
Hi all, just posted in the TDI Items for Sale category before I checked for a for sale thread in the Ontario forum... selling EA288 CRUA timing belt tool kit from IDparts as well as the engine support we built for the job. $150 CAD for both, available in the GTA (Burlington). The post is here:


Thanks!
 

TDI73

Veteran Member
Joined
Dec 5, 2004
Location
Oakville, Ontario
TDI
2015 Golf TDI
Tentatively sold: 4 OEM 16s wheels with all season eNTYRE 2.0 Nokian 205/55/16 from my golf 2015 mk7 tdi, original owner, purchased in April 2019 at Kal Tire in Milton. Around 45000 km total . More pics in the gallery:

Also, 4 VW OEM steel 16s with Nokian Hakkapeliitta R3 purchased in Nov 2018. Original owner. Low mileage ... 205/55/16

Thanks!
 
Last edited:

cdi320

Active member
Joined
Jul 25, 2020
Location
Earth
TDI
Cdi
Parting out my 02 Jetta. Shell is gone, so no doors, trunk or fenders available(they were all rusty in various spots), only decent body panel is the hood which I kept. Whatever is on the list is what I have, everything else is sold or scrapped. Located in Etobicoke by Pearson airport

If it's not on the list, please do not ask, I don't have it, I have only whatever is on the list

hub caps, 2 emblems are missing - 40

mfa clusters x3 - 100 each (2 gas, 1 diesel)

costco battery, stamped 10/20, bought dec 2020, group h6, 730 CCA - 100

washer fluid tank - 20

coolant tank - 15

hand brake, leather, beige 25

handbrake, plastic - 15

airbox without maf - 25

maf - 25

red tail lights, one set (other has a cracked light) - 30

wiper motors with linkage x2 - 60 each

blower motor x2 - 40 each

tdi alh ecu x2 - 60 each

window motors, 5 front left, 2 front right, 1 rear left - 40 each

comfort control module - 35

battery fuse box - 20

wiper stalks with mfa button x3 - 20 each

wiper stalks no mfa button x2 - 10 each

rearview mirror - 20

heated mirrors, driver and passenger (NO GLASS, just covers)- 15 each

abs pump module - 80

rear calipers used for 10000km, hella pagid brand - 90 each

brake master cylinder - 40

Front bumper, black - 40

02j 5speed transmission - 300

various relays and trim - ask

Prices are negotiable

Trunk latches– SOLD

Black leather handbrake – SOLD

Engine, Transmission, Dogbone Mount – SOLD

R-line and regular shift knob – SOLD

Centre Console with cup holder – SOLD

Mirror Glass – SOLD

Rubber Monster Mats- SOLD

Glove Box- SOLD

B - Pillar trim - SOLD

Bottom dash trim under steering column - SOLD

belly pan with side shields - SOLD

rad fans - SOLD

intercooler - SOLD

starter - SOLD

grille - SOLD

arm rest - SOLD

OEM 15 inch 5x100 alloy rims with bridgestone ecopia ep422 - SOLD

brand new turbo install kit - SOLD

mahle vnt-15 turbo- SOLD

power steering line - SOLD

Steering wheel - SOLD

Engine - SOLD

Hood - SOLD

PM is best, prices are negotiable and I think I priced them fairly but feel free to chime in if something isn't














 
Last edited:
Top