Nozzle pop/balance question

[RedDragon]

So I'm having my Titan 764 put on my injector bodies and the guy asked me what to set them at. On the body it said 300psi, so I'm guessing that's stock setting. To go along with the nozzles is a Malone stage 4. So should they pop at the stock 300psi or something else? I also have an 11mm IP if that matters. Any other info need post away. Thanks guys, Adam.

And the 3bar map is on already. Just waiting on the nozzles.

 

[Seatman]

220 for the first and 300 for the second stage, can't go wrong with that and that's where mine are at so it must be good lol

 

[RedDragon]

Response within 5 minutes awesome! Ill passed the word on, thanks.

So what stage tune doesn't matter really?

 

[JFettig]

bar, not psi

 

[Seatman]

You can run them with those settings with no tune or with a full on tune, it's just a good setting. Did a fair bit of searching and emailing to come up with those numbers but they work great in my car with the mapping and I've seen the same setting running bigger nozzles in a stock car with no smoke and nice poke.

 

[RedDragon]

bar, not psi

220bar and 300bar?

 

[bhodgkiss]

Yes

 

[Danarm]

1 bar = 14.7psi

 

[RedDragon]

1 bar = 14.7psi

Right 220bar would be like 3000psi lol

 

[RedDragon]

First stage:220psi=15.15bar
Second stage:300psi=20.68bar

 

[JFettig]

lol, read the side of the injector again... bar. 3200psi and 4400psi.

 

[RedDragon]

lol, read the side of the injector again... bar. 3200psi and 4400psi.

It's at a shop or I would lol. I'll pass the word on tho. Sorry for the confusion and thanks for all help!