New England Dragway anyone?

k_harley

Vendor , w/Business number
Joined
Oct 26, 2006
Location
Lowell, MA
TDI
2006 Jetta TDI, 2005 Audi S4, 1997 Audi A4 Race car, 2004 Passat TDI 6MT 4motion
I was wanting to run my car at the track before the end of the season and wanted to see if anyone else was interested in making the trip to Epping. Street nights are wed. and fri. nights 5pm to 10pm.

I think its $35 for unlimited runs (as time allows), car must be registered, inspected, and pass their own safety inspection. One item that is pertinent to our cars is that your clutch cancel switch must be working in order to pass THEIR tech. inspection. Other than that, its pretty much the same as a state safety inspection.
 

GTiTDi

TDIClub Enthusiast, Macht Schnell! Vendor , w/Busi
Joined
Oct 18, 2010
Location
3 Spruce st Wareham, gateway to Cape Cod Massachus
TDI
'91 GTI CJAA swap,'02 Jetta wagon ALH swap, '03 GTI 1.8T rally car, '03 Sprinter 3500
I will as soon as I fig out the rapping noise from my engine...Got any AHUs or 1Zs for sale? I haven't narrowed it down yet but when I do I may need a fresh start..
 

xtu1963

Active member
Joined
Jun 2, 2011
Location
Haverhill, MA
TDI
2011 Jetta TDI
Their tech inspection is a joke. I went with my Challenger and they didn't do hardly anything before waving me on. That said, it was fun to run on the track. My launch technique sucks, so the best I could do was a 15.9 1/4 mile in my 3.5L Challenger.
 

k_harley

Vendor , w/Business number
Joined
Oct 26, 2006
Location
Lowell, MA
TDI
2006 Jetta TDI, 2005 Audi S4, 1997 Audi A4 Race car, 2004 Passat TDI 6MT 4motion
It all depends who you get, just like state inspections.

Eek, wrapping motor.....I just dont trust 1Z's any more....I have some hard parts here, but no complete motors.
 

KITEWAGON

Veteran Member
Joined
Jun 29, 2009
Location
Seacoast, NH
TDI
2014 Touareg Exec, 2014 JSW
I'm not interested in racing, but this track is only about 20 minutes away so I'd stop by to say hi and watch the runs if there was a TDI contingent there and I was around. I've never actually been there. So please post up if you end up doing this.
 

k_harley

Vendor , w/Business number
Joined
Oct 26, 2006
Location
Lowell, MA
TDI
2006 Jetta TDI, 2005 Audi S4, 1997 Audi A4 Race car, 2004 Passat TDI 6MT 4motion
I could do friday oct. 7th if everyone else is down with that?
 

sweetjeep

Veteran Member
Joined
May 16, 2005
Location
North Central, MA
TDI
2002 Jetta
There is a good chance I can join. You know.. to make sure all you guys feel good about how fast your car is (in comparison to mine). :)
 

JKHTDI

Active member
Joined
Dec 1, 2010
Location
Where the sun doesn't shine
TDI
mkvi golf
There is a good chance I can join. You know.. to make sure all you guys feel good about how fast your car is (in comparison to mine). :)
I'm running stock for a baseline before tuning it, you may very well be faster than I am. Come out tomorrow and we'll run. haha

Unfortunately I only had time for one run at the test and tune this past weekend before I had to leave for work, so I'll be heading up tomorrow night after work for street night. Maybe I'll see some of you there, I've got the black 2 door mk6.
 

740GLE

Top Post Dawg
Joined
Aug 19, 2009
Location
NH
TDI
2015 Passat SEL, 2017 Alltrack SE; BB 2010 Sedan Man; 2012 Passat,
i drive by it each day, sadly i don't really have any interest to know that i still have a slow car compared to those that would be there.
 

JKHTDI

Active member
Joined
Dec 1, 2010
Location
Where the sun doesn't shine
TDI
mkvi golf
Its $20 for street night, didn't see anyone there. Ran 12 passes with an average 16.686 sec, best time was a 16.354 sec. Average trap was 83.935 mph, with best being 84.41 mph. Average 60' was 2.714 sec, best 2.486 sec. I'll post slips if anyone cares to see.
 

GTiTDi

TDIClub Enthusiast, Macht Schnell! Vendor , w/Busi
Joined
Oct 18, 2010
Location
3 Spruce st Wareham, gateway to Cape Cod Massachus
TDI
'91 GTI CJAA swap,'02 Jetta wagon ALH swap, '03 GTI 1.8T rally car, '03 Sprinter 3500
It all depends who you get, just like state inspections.

Eek, wrapping motor.....I just dont trust 1Z's any more....I have some hard parts here, but no complete motors.
Well I have been doing a lot to make my 1Z an AHU...rebuilding the head with 7mm valves, ALH pistons...
 
Top