AFSOC_Commando
Veteran Member
To my tranny experts...
I have a 2005 BWI MK4 Jetta 5 Sp 02J
I replaced the Clutch last year with a Stage 3 Endurance clutch kit from Darkside development.
About a month ago I started to get clutch slippage under load, my car is stock at this time due to a dealership reflash.
It steadily has gotten worse and I quit driving it and pulled the tranny today. I see strange wear on the bell housing and it seams as if I have excess wear on the throwout bearing as well. And I noticed that the Ball pin plastic piece was broken when I pulled the tranmission. Not sure if that occurred while finagling the tranny off or from use.
Not sure whats going on or how any of this could cause slippage.
So, Any ideas?
Thanks
I have a 2005 BWI MK4 Jetta 5 Sp 02J
I replaced the Clutch last year with a Stage 3 Endurance clutch kit from Darkside development.
About a month ago I started to get clutch slippage under load, my car is stock at this time due to a dealership reflash.
It steadily has gotten worse and I quit driving it and pulled the tranny today. I see strange wear on the bell housing and it seams as if I have excess wear on the throwout bearing as well. And I noticed that the Ball pin plastic piece was broken when I pulled the tranmission. Not sure if that occurred while finagling the tranny off or from use.
Not sure whats going on or how any of this could cause slippage.
So, Any ideas?
Thanks