Hard starting

[Dirtymax]

Hey guys I just bought a colt stage 2 cam kit for my 06 tdi, at first it would start and die, set up vcds on my laptop, found to cam sensor codes one being out of range. I moved the tone ring and tightend everything, and it started did the break in process, and let it idle and check torsion value it was dead on 0,ive noticed it doesn't like to start in the mornings, it's been around 23 degrees farenheight, should I recheck the torsion value to see if it changed?

 

[Rx7145]

Yes I would recheck. I am suspicious that it was exactly 0 that would be very hard to do on purpose. I would also try running it a degree or two negative.

 

[Dirtymax]

Yes I would recheck. I am suspicious that it was exactly 0 that would be very hard to do on purpose. I would also try running it a degree or two negative.

Alright, I thanks buddy