G500 and Vag-Com

[mctdi]

I have searched for, but have been unable to find, where in Vag-Com to see the value of the turbo vane position sensor on a PD. There are many lists here on TDIClub, of what Vag-Com can be used to monitor on TDIs.

The turbo vane position sensor should be able to be seen by Vag-Com.

Any help?

 

[Uwe]

VC can only see what the car is willing to show. You have a BEW engine right? If the ECU is willing to show values from the G500 sensor, I've never seen it documented anywhere.

-Uwe-

 

[mctdi]

Uwe

Thanks for the reply.

Good to know what I was looking for is not there. So now I know my eyes are still good.

 

[rickdick80]

I have searched for, but have been unable to find, where in Vag-Com to see the value of the turbo vane position sensor on a PD. There are many lists here on TDIClub, of what Vag-Com can be used to monitor on TDIs.

The turbo vane position sensor should be able to be seen by Vag-Com.

Any help?

See this reply: http://forums.tdiclub.com/showpost.php?p=2060890&postcount=12

I'm having the same code on my '04 Golf PD100, I'll bet it's those wires!

 

[mctdi]

See this reply: http://forums.tdiclub.com/showpost.php?p=2060890&postcount=12

I'm having the same code on my '04 Golf PD100, I'll bet it's those wires!

I had posted that post.