From the OBD port no communication help needed please

sheffieldyorky

New member
Joined
Feb 8, 2022
Location
SHEFFIELD
TDI
A3 1.9Tdi
Hi there
I have A3 8P1 2009 1.9Tdi BLS engine
I have an odd problem and I was hoping that somebody will have had this issue or will point me in the right direction.
Upon plugging into my OBD port there is no communication with any modules. Power found at OBD port, and grounds. All fuses are O.K
I am using a Maxicue
Tony
 

juliywann

Member
Joined
Apr 16, 2022
Location
annaba
TDI
2014
What kind of reader are you using? Have you checked to make sure the pins on your OBD port aren't bent or messed up? What about a cut wire behind the port?






 
Last edited:

sheffieldyorky

New member
Joined
Feb 8, 2022
Location
SHEFFIELD
TDI
A3 1.9Tdi
What kind of reader are you using? Have you checked to make sure the pins on your OBD port aren't bent or messed up? What about a cut wire behind the port?
Hi there
Many thanks for your response
As this thread was started at the beginning of February, I went down a different route, i.e. the supplier, it's all sorted now.
Thanks
 
Top