kromicacid
Veteran Member
I created a PDF on how to change the Service Now reminder from 5,000 miles to 10,000.
Can we put this in the FAQ/DIY?
http://pics.tdiclub.com/data/500/Service_Change.pdf
Standard disclaimer: This document is for informational purposes only. Neither the author nor this site will be held liable for actions taken resulting from the information set forth herein.
Tools: Computer
Vag-Com
Here is the DIY to change your service reminder from the 5,000 miles to 10,000 miles.
Select “Select” under Select Control Module
Under the Common Tab
Select “17 – Instruments”
Select “Adaptation – 10”
Change “Channel Number” from 00 to 50
“Read”
Input “New Value” to 100
“Test”
“Save”
Click “Yes”
“Done, Go Back”
Close controller and you are done.
Then to reset the “Service Now” indicator:
From http://forums.vwvortex.com/zerothread?id=3621413
Step 1) Using your left hand, press and hold the "0.0" button, located at the bottom right of your instrument cluster
Step 2) While holding the "0.0" button, using your right hand, insert your key into the ignition and turn it to the on position (w/o starting the engine)
Step 3) Let go of the "0.0" button
Step 4) While it still says "Service Now", press the "M" button on the bottom left side of the instrument panel.
Sorry for not being able to make the pics come up here, but click on the PDF file at the top.
Can we put this in the FAQ/DIY?
http://pics.tdiclub.com/data/500/Service_Change.pdf
Standard disclaimer: This document is for informational purposes only. Neither the author nor this site will be held liable for actions taken resulting from the information set forth herein.
Tools: Computer
Vag-Com
Here is the DIY to change your service reminder from the 5,000 miles to 10,000 miles.
Select “Select” under Select Control Module
Under the Common Tab
Select “17 – Instruments”
Select “Adaptation – 10”
Change “Channel Number” from 00 to 50
“Read”
Input “New Value” to 100
“Test”
“Save”
Click “Yes”
“Done, Go Back”
Close controller and you are done.
Then to reset the “Service Now” indicator:
From http://forums.vwvortex.com/zerothread?id=3621413
Step 1) Using your left hand, press and hold the "0.0" button, located at the bottom right of your instrument cluster
Step 2) While holding the "0.0" button, using your right hand, insert your key into the ignition and turn it to the on position (w/o starting the engine)
Step 3) Let go of the "0.0" button
Step 4) While it still says "Service Now", press the "M" button on the bottom left side of the instrument panel.
Sorry for not being able to make the pics come up here, but click on the PDF file at the top.