tdiblair
Veteran Member
- Joined
- May 16, 2005
- Location
- CT Yankee
- TDI
- Passat 2005 silver Passat Sedan & 2005 Wagon Stone Henge Gray
Will the same "Brake Resetting Tool" be sized so that it can not only press back the piston on the front calipers but the smaller rears too - or do I need two seperate resetting tools to get both the front and smaller rear pistons pressed back in?
Do I even need a brake resetting tool or you guys getting by with a carpenters C clamp and a block of wood - without cocking the piston?
What is the brake resetting tool of choice and where is a good place to buy it? Was looking at a Metelnerd.....but ...it's appearence and methond of operation is much different than what I see in my Bentley Books under T 10145 for their tool which looks more like a large ' L ' .
Blair
Do I even need a brake resetting tool or you guys getting by with a carpenters C clamp and a block of wood - without cocking the piston?
What is the brake resetting tool of choice and where is a good place to buy it? Was looking at a Metelnerd.....but ...it's appearence and methond of operation is much different than what I see in my Bentley Books under T 10145 for their tool which looks more like a large ' L ' .
Blair