b100 in an alh

[opie951]

just looking for what to expect from the guys running b100 in thier alh. do i need anything special to run it or cani just fill and go. and i know it will jell at under 40F

 

[loganbmx4gt]

Fill up and go. Switching back and forth from bio to D2 can cause some leaks since bio swells seals, and going back to D2 will allow them to shrink back. But if your pump has been resealed with the viton kit already your fine on that part. Some of us change our fuel lines running from the fuel filter with viton as well just for good measure.

Enjoy running bio!

 

[2slowtdi]

I ran B-100 to B20 for years in my ALH motor and I did replace the injection pump seal with the viton seal and the return lines fuel with viton.

I found that B-20 worked best for mileage and power.

 

[opie951]

what is the difference in power-mileage between #2 , B20, and B100