I may have some of those somewhere...seems I got several once, what color are you looking for?I need the trim for the exterior of the C pillar. Its about 4-5 inches long and maybe 2 inches high. I also need the rear view mirror covers for the inside of both front doors. Thanks.
I have it and it should fit into a flat rate box. I’ll package it tonight. Can you pm me your address?I fixed the issue with the shift tower, so I am set on that. Any chance you could get the climate control unit in the next month or so?
would you be willing to get a driver door window guide and possibly a regulator from your pick and pull find? I was told it needed a regulator, and when the regulator was installed, discovered the lack of a window guide. Thank you for considering this adventure.I have it and it should fit into a flat rate box. I’ll package it tonight. Can you pm me your address?
14183 E Whispering Ocotillo Place, Vail, AZ 85641would you be willing to get a driver door window guide and possibly a regulator from your pick and pull find? I was told it needed a regulator, and when the regulator was installed, discovered the lack of a window guide. Thank you for considering this adventure.
thank you for your reply. Whenever is just fine - the car is a work in progress. Wishing you a Merry Christmas.Well, I haven't pulled it yet and won't be back to the yard for about a month.
I have a new one I’d let go.I need the lower dipstick tube that goes into the block. Let me know if thats possible
Upper, lower, or both? With or without the MAF?I need a airbox,
I think it’s available. I’ll check tomorrow. Is this for a sedan?I could use the fuel tank sending unit from the 96 tdi if available, thanks Ralph
It‘s located in the Prescott Valley U-Pick-It junkyard.Good Morning, I live in New Mexico. I’m thinking of making a a road trip to see this car and pull some parts off of it. Where is the car located? Thank you, Hans
The part you need to prevent the window in place is not part of the regulator, but is the window guide, part number 357837077B. It goes on the slider that is attached to the window regulator but is not part of it.asking for the driver door regulator and the piece that keeps the window in place when the motor is rolling the window up and down, I have not been able to locate the part number or name, but usually it is connected to the regulator. I would be glad to drive ti pick it up if you are willing to see if it is on the car. I am willing to pay you for your effort and also if you are willing to pull it. My residence is in the Tucson area, I have a 97 B4 sedan. thank you
roxanna
I'm looking to restore my 96 passat back to stock, got a big cold air intake it came with and need it gone soon, I'm assuming I need it all with MAF too. All I drive now are mk4 alh's so I'm not as familiar with the stock setup is in this platform.Upper, lower, or both? With or without the MAF?
I have both of them from the car but they didn’t give them away. They were $50 each but are in good shape and have the motors. I figured if you didn’t want them I’d use them for my own car In due time.I am needing the drivers door window guide and regulator. Would you be willing to pull them - for compensation? Thank you for your reply. 541-591-1430 Roxanna
I have both of them from the car but they didn’t give them away. They were $50 each but are in good shape and have the motors. I figured if you didn’t want them I’d use them for my own car In due time.
I do have a few of the clips that fix what you describe, and I can put them in if you’d like. Or if it needs the whole thing that’s pretty easy as well, but I’m not headed down that way anytime soon.
outside door handles - inside are ok.also would ask if you go back to the pick and pull, the 96 tdi passat now needs driver and passenger door handles. Would you be willing to get the door handles? I am also willing to send you payment - let me know what works best for you.
Roxanna
I will see what I can come up with.outside door handles - inside are ok.
Also remembered that the container for window wash fluid is broken and need a sprayer for the fluid also - Thank you for looking - RoxannaI will see what I can come up with.