Title says it all. I have replaced everything in the front end except for front control arm bushings, rack bushings, and CV joints.
Literally everything else is new within 6 months.
this Includes:
Tires - Continental DWS06
Shocks - all 4 Bilstein B4 for Audi S3
Strut bearings
Complete tie rod replacment both sides
Ball joints both sides
LCA bushings, HD for R32
Sway bar end links
car was just aligned last month wheel was straight when I left and car drive normally but still feels like there is something loose/car feels like it wanders/ steering feels looser than it should.
Now the wheel is not fully centered and when held at center car pulls to the left. The subframe bolts were not loosened or removed during the alignment.
Any thoughts?
Literally everything else is new within 6 months.
this Includes:
Tires - Continental DWS06
Shocks - all 4 Bilstein B4 for Audi S3
Strut bearings
Complete tie rod replacment both sides
Ball joints both sides
LCA bushings, HD for R32
Sway bar end links
car was just aligned last month wheel was straight when I left and car drive normally but still feels like there is something loose/car feels like it wanders/ steering feels looser than it should.
Now the wheel is not fully centered and when held at center car pulls to the left. The subframe bolts were not loosened or removed during the alignment.
Any thoughts?