02 Tacoma double cab CJAA swap

[Bigtoy302]

Started on my 2002 double cab project last week finally after a long time of planning and gathering parts.
2002 Toyota Tacoma double cab PreRunner.
2013 CJAA CR 2.0 TDI
R150F 5 speed trans
10" LC engineering dual comp clutch
97 Land cruiser FJ80 axles (Elocked rear, Open front) linked front and rear on coils.
285/70/17 BFG muds
17" Procomp wheels.
I machined my own adapter for this swap to use the R150f trans, clutch, flywheel and stock starter.
Engine will be stock for now with a GTB1752vz turbo. I have another engine I will be building while working the bugs out of the truck first. That engine I will be porting the head, and doing Colt stage 2 cams with Mecevo springs. Also Tuscan rods and ARP head studs and a R70 CP3 pump. I will also be doing compound turbos ,GTB1752vc and a GTX2867R. I already have all these parts minus the head studs.

 

[jmodge]

What ties to the pipe on the motor mounts? Nice looking welds by the way.

 

[Bigtoy302]

What ties to the pipe on the motor mounts? Nice looking welds by the way.

Big polyurethane bushings.

 

[Motohead1]

Nice build and list of parts. Standalone? or tuner?

 

[PickleRick]

The fj80 axles under the Tacoma is how these should have come factory. I dig the e locker although i wish we would have had an option for the cable lockers the older cruisers got overseas.

 

[Bigtoy302]

Nice build and list of parts. Standalone? or tuner?

Stock ECU deleted/tuned. 2010 ECU.

 

[nikbristow]

Sub'd and drooling. This is the dream for my '01 Double Cab, Man.

 

[mogly]

Sub'd and drooling. This is the dream for my '01 Double Cab, Man.

Agreed. I daily a VW T4 TDI DoKa but if not it would one of these. I would add one of the Aussie inspired Ute beds on it, for functionality, not looks.

 

[GEFP]

This looks interesting!