justwrong
Member
been a while but have some new things to try and show with tdi alh. timing belt broke and bent valves relied on others doing major mechanical work now im doing ut all with another alh auto conversion being delivered complete w 162000 miles which shoild het me by for a bit while i build a darkside alh but more importantly i can set up this salvage stock with a solid efficient base to support the performance build
-all aluminum radiator
-ac delete complete
-electric crank case evac w ret to dipstick
-water air intercooler
-rear mounted larger battery
power steering cooler and res relocate
-DS pd150 flywheel intake w alh ASV
-DS rubber mounts all
-DS remote tune stock w 2nd ecu for performance
DS 4 bar map cold air track
-cold air KN with outerwear relocate to right fender
-DS ext oil cooler
- heater core seperate system from alh
-heat exchange oil cooler delete
https://i.postimg.cc/gJwt840w/jetta-pick-up.jpg
https://i.postimg.cc/zGJd0qBY/jetta-side.jpg
https://i.postimg.cc/t4SzkPwF/4k-gen-80-lb-lp.jpg
https://i.postimg.cc/7h897kcc/jetta-bad-tbelt.jpg
https://i.postimg.cc/TPnp1vVh/alh-h20-intercooler.jpg
https://i.postimg.cc/m2bdLbGp/jetta-alh-teardown.jpg
-all aluminum radiator
-ac delete complete
-electric crank case evac w ret to dipstick
-water air intercooler
-rear mounted larger battery
power steering cooler and res relocate
-DS pd150 flywheel intake w alh ASV
-DS rubber mounts all
-DS remote tune stock w 2nd ecu for performance
DS 4 bar map cold air track
-cold air KN with outerwear relocate to right fender
-DS ext oil cooler
- heater core seperate system from alh
-heat exchange oil cooler delete
https://i.postimg.cc/gJwt840w/jetta-pick-up.jpg
https://i.postimg.cc/zGJd0qBY/jetta-side.jpg
https://i.postimg.cc/t4SzkPwF/4k-gen-80-lb-lp.jpg
https://i.postimg.cc/7h897kcc/jetta-bad-tbelt.jpg
https://i.postimg.cc/TPnp1vVh/alh-h20-intercooler.jpg
https://i.postimg.cc/m2bdLbGp/jetta-alh-teardown.jpg
! I admire the creativity, though.
