Search results

I do several radio shows on around the country. Here is the one I am doing about the TDI and the Texas Mile . I will be talking about TDI performance and the upcoming events come listen http://www.autoworldradio.com/awr_MainPage.asp

We I’m giving up on the impossibly small VNT turbo’s. Here is what it takes to make a HY35 work. First you need the 9cm exhaust housing. This is on a 2000 to 2002 Cummins automatic. I have a new EFR turbo coming , but it’s going to be too late for the Texas Mile next week. I'm looking for 350...

looking to raise the record from 132 to 150 at the Mile, anyone wanting to come by the Syndiesel trailer we will have beer sodas and snacks hamburgers all TDI people welcome, please rsvp so we will have enough. If any one needs fuel you can save the shipping and pick it up there Jordan...

. I notice a thread aimed at out running me. I have been asking Ron Knocks at NADM National Association of diesel Motorsports to create a TDI series for over 2 years. Together with a few people in the TDI community we are working to make a 7 race series in a National Event setting a...

This is the project from begaining to present the car as we recieved it nice 100,000 mile Beetle ran great , setting beside the dragster I showed up at Steve Glovers shop in Fort Worth Texas I put it on the Dyno , and it was in need of a little power up on the rack it...

I had a lot of fun this last weekend at the Texas Mile, first our NX Dmax Mustang went 202.4 mph in the standing mile, and I took one of the neatest cars I have ever driven down the track. In a total stone stock condition it ran 127.1 in the cool morning air. We then put the SynDiesel in the...

got my pistons in for Project X "The Beetle " , one day to late for the Texas Mile , They are 90 grams lighter . There are going to be avalable with tool steel pins and rings for a very reasonable price

I was putting my new dragster motor together , and I thought I would show you my new Duramax pistons. I have the TDI pistons on the fast track, as well as forged Rods I'm going to make this happen before the end of the year.

I'm going back on the flowbench in the very near future. The first heads were done rather quickly , to make it to Drag Week on time. The best numbers are close to 200 @ 28 inches. I am confident that there is a lot more in these heads , the seats are part of the problem as well, we are going to...

The amount of engine blowby on every TDI that I have looked at is just totally unacceptable. I’m going to jump in and push the envelope again for the little engine that could. This exerciseis in preparation for the CR engine program that is in the beginning stages for the beetle and a new...

ARP2000®: Head Stud kit now available for ALH these studs are the fix for head gasket lifting , they torque to 125 ft lbs . the main studs are coming , as well as a stud kit for the PD , new CR engines I also need a blown up PD head to do testing , and to slice and dice. I will give a set of...

After getting a dozen or so PM’s about Nitrous , I thought I would give a few basics, on the best methods to use nitrous in any diesel application , to include the VW TDI . The Nitrous Express system is has the ability to ramp up nitrous flow based on Boost , time , or RPM. First method Boost...

The SynDiesel Project X Diesel “ the Beetle “ is heading to the Texas Mile October 16 thru the 18 . http://www.texasmile.net/ This event is a great get together in historic Goliad Texas , we will have fuel onsite for anyone that would like to give it a try. The Nitrous Express Duramax powered...

After looking at the ARP head studs that everyone is using for the TDI part number 251 4701 Ford Cosworth Sierra/Escort head stud kit. I have begun to work on the TDI engine platform to give some options to people building this little engine Part number 251 4701 is a Chromemoly 12 mm back cut...

Ok we are starting off late , very late I’m a drag racer with extensive experience with magizine projects and extensive experience in diesels . I will get the little project car on Sunday . There are 5 weeks letf before I need to have this car at Hot Rod Magazines Drag Week, with its two big...