Search results

Is it possible to fit the bitdi charge cooler to crbc TDI both ea288 engines just want to use the bitdi as it's much bigger

Is there a difference in flow rate 04L130277 AC vs 04L130277AE injectors

Do the cuaa cams in the bitdi passatt have more lift then the crbb engine 150hp

Do the cuaa cams in the bitdi passatt have more lift then the crbb engine 150hp

Do the cuaa cams in the bitdi passatt have more lift then the crbb engine 150hp

Is it possible to fit cuaa bi turbos to ea288 engine, any 9ne done similar conversion

How easy would it be to convery from manual to dsg on audi a3 8v tdi 2.0 ea288 engine any one ever done a conversion

Looking at swapping out my cp4 pump for a cp3, I've sourced a few pumps 0445010042 R70 which I believe is used on the older common rail engines, now I'm guessing I need the BMW pump for the ea288 engine without the pump gear on the back, can any clear these up that have done the conversion, I'll...

Doing a few mods on my cr 1.6 tdi ive got a gtc1549vz on order to fit, does any one no if I can use the cr170 intake pipe with 80mm maf aswell, looking to see how far i can take this engine, does any of the other stuff from the cr170 fit etc, I'm aware the cr170 has bigger valves can that head...

Looking into swapping my cr 1.6 tdi engine to the 2.0 cr engine, from what I can gather the engines pretty much the same with the sensors etc, would I get away with keeping the 1.6 ecu and swapping all the 2.0 maps across rail pressure, durations etc, instead of swapping ecu' s then having to...

Is it possible to use a 2.0 cr170 head on 1.6 tdi cr as the valves are bigger

any one done a engine converstion on a caddy 2012 1.6 tdi, thinking of a 2.0 cr engine would i get away with changing engine loom and ecu or is there alot more work involved to get it to run i no about id need to get the immo coded to work with new ecu etc?

does any one no the specs on pd tdi 2.0 16v bkd camshaft how much lift etc?

who's ran a dbilias cam 280° 10.5mm lift cam in tdi 1.9 pd looking at getting one would it be suitable for a gtb2260vk build

Any no what would be best performing cam for 1.9 tdi pd engine running dssr 130% nozzles and gtb2262vk thinking of nps cam or maybe colt cam stage 3 but can't find any specs on the colt cams

just got a smf cg 6 paddle clutch it as valeo stamped on the flywheel and valeo on the pressure plate and luk on the clutch disk with the paddles fitted any 1 any experience with these clutches

Wanting to upgrade nozzles on a pd130 to dssr 130% what bodies are best to use I hear the bew bodies flow better through the channel is this true

After an d24 inlet for a pd130 converted if any 1s selling

whats required to fit bigger valves to my asz pd130 head is it a straight swap or do i need them machining out to fit the bigger valve

wanted big pd injectors firad bosio whats for sale thanks