Vw & epa
Dead right they didn't make a mistake. I think that we are soon going to see other car manufacturers who have done similar.
I saw a show last week, Panorama BBC where they did test's on the VW & showed the defeat device in action, then they did the same test on a Opal/ Vaxhaul/ GMC...
VW Goodwill Credit
I have just received mine. Starts Dec 7th here in Canada. Is this deal same as your's in US ;
Dear Volkswagen Owner,
Volkswagen Canada would like to provide registered Owners of affected 2.0L TDI vehicles with a gesture of goodwill for your continued patience – a $1,000 Owner...
2014 Jetta TDI
I have a new 2014 Jetta TDI with steel rims. I was hoping my 2005 Passat alloy rims, which has new rubber would fit but they do not.
Anybody know what wheels will fit. When I look at the bolt pattern on the spec's it is the same but the offset is different ? (5 x 112 CB 57.1...
Passat TDI Reflash Recall (Nov 2010)
I was lucky to be the first one to have this re-call done last month at 5th Ave Auto in Calgary.
I had replaced my glow plugs with steel plugs some two years ago. I took it to 5th Ave Auto to have the re-flash done. Since that time I had a hell of a job...
I have a 99 MK4 Jetta that I am reluctantly selling as we are moving soon,
290, 000 Km's
5 Speed
New Tires
Zero Temp
New Battery
Power Window
Power Locks
Power Mirrows
Heated Seats
Cruise
A/C
Regular fuel consumption 4.9 - 5 Ltr's/100Km's
I have owned car for past 9 years.
Have had water...
While searching for info on IAT sensors I came across this thread.
I have a 2005 Passat TDI & need to locate the two wire to the IAT sensor. It is combined with the charge air sensor, as a result I have 5 wires to choose fromm. Could you advise whiche 2 wires are for the IAT as I am fitting a...
I am installing a Boss Performance Module on my 2005 Passat TDI. I need to locate the (IAT) Intake Air Temperature wires. I have located the unit which is Intake Air Temprature Sensor/Charge Air Pressure Sensor.
I need to locate the two wire from the IAT sensor. Can anybody advise which two...
I am installing a Boss Performance Module. I need to locate the (IAT) Intake Air Temperature wires. I have located the unit which is Intake Air Temprature Sensor/Charge Air Pressure Sensor.
I need to locate the two wire from the IAT sensor. Can anybody advise which two wires are.
Thanks
Alan :p
Hi Guy's sorry to remind you, VW have told me that the re-flash for the steel G.P's is the problem. If you have had the re flash VW will correct this soon as the dealer informed me that many people complained of poor starting after the re flash & the problem is with the software. Contact your...
Thanks for the info. I have a Zero temp heater on both my Diesel VW's. & Duramax. I plug in when it is below -10'C. The problem is not the heater or the G.P.'s but a software problem that VW has accepted. I am informing people of a possible recall on the problem cuased by the steel G.P. recall...
Just an update.
I had my G.P.'s reflashed in May of this year. Now it is -30'C infact anything below -10'C my Passat will not start. Jetta no problem. I phoned 5th Ave Auto VW dealer in Calgary who did the Flash. They tell me that the software is wrong & are in the middle of a fix. They will...
I hope I have the right forum. 2005 Passat B5
After having a steel G.P.software update by VW dealer in cold weather -10 C' or below. I have problem starting.
5th Ave auto Calgary who did the work in May of this year tell me that VW are working on the software problem & will advise me when a fix...
Just got off the phone with 5th Ave Auoto Calgary. Software problem VW are working on it will be a recall.
Will keep you posted.
Best dealer since giving up on Northland VW Calgary.
I had the flapper motor this past summer after I replaced the glow plugs for steel. VW also re programmed for the steel plugs. I am fining more & more a problem starting when cold, even when I have plugged in for several hours with Zero temp. I cycle plugs 2 to 3 times to help but still hard...
I had the flapper motor this past summer after I replaced the glow plugs for steel. VW also re programmed for the steel plugs. I am fining more & more a problem starting when cold, even when I have plugged in for several hours with Zero temp. I cycle plugs 2 to 3 times to help but still hard...
Flapper Motor
Hi, have you got any further with this. I sent you a breakdown of the strip down.
I would be interested to know how to test it now I have stipped it down. I have put power direct to the motor & it work OK ? :rolleyes:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.