Been a while since my car was stuck at 500hp (2018) - Heads lifted so added low comp pistons , stronger headbolts, bigger injectors, bigger OEM exhaust, bigger pump resulting in this
Injectors don't seem to like high rail pressure so more are being made to get rid of the dip and hopefully...
Hi I have this unit S360v
https://imgur.com/a/Kz1qLZ4
Compressor and turbine look fine and VNT is nice and free
If you are interested drop me a email:
BobbySinghRacing@outlook.com
Looking for £600 plus postage (its about 20kg)
Thanks
Bobby
Audi A4 3.0TDI 505hp 980nm
Well guys managed to hit my target of 500hp
So what’s changed? As you know my s200v has been put up for sale to make way for unique turbo.
EFR7670 with S300v housing :) its a watercooled roller bearing turbo with really nice wheels -
CW:76/57
TW: 70/61, gamma-Ti...
Hi decided to sell my Hybrid S200v as most will know it made 440hp / 900nm. I've ran this unit for 30k without a single issue. The unit is like new zero play in the shaft. Compressor wheel and turbine are mint.
Includes:
S200v hybrid
CW 70/50
TW 63/56
with modified compressor housing - anti...
BW S200v Brand new - 175900
With Anti surge compressor housing (100mm inlet)
Looking for £850 plus postage. Unit is in Heathrow area if you want to collect.
I can supply a 52/70 EFR CW wheel if required for a extra £100. You will need to find a local turbo place to install it.
With the...
Hi all,
I'm after a left hand thread banjo bolt for a GT1646v - 765261 - 6
A friend of mine has ruined his one thinking right hand thread.
My turbo guy has nothing available.
Worst case will have to buy and blank and make it.
Thought I'd ask just in case.
Cheers
Bobby
Finally got a chance to run the car at santa pod last weekend:
Took Class J :)
Here are some video's:
Note this run was done with a 2.8k take off and this results in 4.5secs to 60 with a 3k take off I have seen 4.1 secs so this time could be improved upon.
Also, the run was done with...
Hi all,
Im looking to sell my 3" exhaust system which was made by my supplier in Germany.
We've used high grade stainless with V band connection.
Two mufflers were added and the tips are approx 100mm
Here are some pictures:
Here is a video of the sound (note i have a dpf delete...
Hi guys,
I'm building engine for a Caddy van. The Caddy van came with a BLS engine but threw a rod and put a hole in the block.
My plan is to use a spare ARL block.
Now the problem:
The BLS has the crank pick up ring built in to the rear oil seal:
The ARL engine has the following set...
Hi all,
What tool do people use to capture/log the above ecu? its a 2005 model. I've tried Bosch KTS and snap on solus but only have function to capture screen shots.
VCDS/Vagcom generic OBD - doesn't work neither.
Cheers
Bobby
ARL bottom end with 70k
The block has no conrods, 3 pistons and one oil jet missing.
Apart from the above the block has mint bores, crank shaft, main caps, oil pump
Can be collected from UB1, SL4 or RG22
£130
Cheers
Bobby
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.