Search results

  1. 300D

    AC question

    Last summer I just about completely rebuilt my AC. New compressor, new condenser, new Fan Control Module, new drier, new expansion valve. Seemingly all good parts from AutoHausAZ. Compressor is a Nissens. Early this summer I discovered it not working again. Thought that maybe it was a leak at...
  2. 300D

    Set of injectors w/ Firad 520 nozzles for 2003 Jetta ALH, professionally mounted and set. $400 w/shipping (Price Drop)

    Bodies with about 120K on them, Firad 520 nozzles with about 10K. the 520s are .205 opening size. I bought the nozzles from IDParts last year, then sent them to Diesel Forward in Wisconsin to be installed onto the injector bodies. The tech at Diesel Forward commented that the bodies were in...
  3. 300D

    NOT MINE: Good Looking Manual Wagon in Maine, 230K for $3500.

    NOT MINE: https://maine.craigslist.org/cto/d/brunswick-2003-vw-jetta-wagon-tdi/7246617321.html
  4. 300D

    Thoughts on tiny puff of white smoke(Resolved)

    Hoping for some direction. On cold starts, I am getting an increased starter time lately, maybe 3 turns with one soundings bit long, and a small puff of diesel smelling white smoke. No smoke at all when idling even when cold Car is a 2003 with newish Firad 520’s(.205), tested and balanced...
  5. 300D

    WTB: Gray Center Console w/cup holders

    Anyone have a good condition center console in gray with the cup holders? I have a 2003 wagon.
  6. 300D

    WTB: Steering wheel

    I currently have a 4-spoke with sun damage on the top. Looking to buy an excellent condition replacement. Black, just in case they come in other colors. I might be interested in a 3-spoke too, but it would have to come with the airbag. I don’t want to look separately. No steering wheel...
  7. 300D

    Door sail panel part number?

    Curious if anyone knows what the part number is on the passenger side door sail panel? Is it integrated with the tweeter? The little tab for the door panel attachment is broken. I may try a fix, but figured I would look into replacement costs. Cannot for the life of me find the number online...
  8. 300D

    Oil pan sensor cover plate leaking...

    The three bolt cover plate at the bottom of the oil pan is leaking a bit. Where the oil sensor that is not there goes. Pulled it off to clean up, reseal and reinstall. Turns out there is an O-ring there. Anyone know the part number for the o-ring? Or a compatible one? Also, when reinstalling, I...
  9. 300D

    Dorman side skirt review

    Update: Dormans are perfectly fine. I was the one misshapen. See last post. My belly pan is OEM and in decent shape, but my side skirts are a wreck. Decided to buy some new ones. Went with the aftermarket Dorman ones from Rock Auto. $45 shipped for both. Good price I thought. When will I ever...
  10. 300D

    Low side coupler doesn’t fit.

    Maybe I haven’t had enough coffee yet this morning, but my AC manifold quick coupler does not fit onto the low side port. Here is a picture of it. The distance between the end and the ring the coupler grabs a hold of is too long. What is going on here? Is it missing something? This manifold has...
  11. 300D

    DIY overhaul AC?

    I am about to replace fans and do an AC overhaul. System is currently empty. I did an engine swap in December and I am hoping the compressor on the replacement engine is good. The old one had been neutered at some point in it's life and had the clutch removed(I think). I was going to do it all...
  12. 300D

    When will diesel prices start to fall?

    Gas prices have dropped super low. I have seen $1.49 up here in Maine. Will diesel start to follow? Still at $2.76. Can anyone explain exactly why diesel prices fluctuate offset/behind from gasoline?
  13. 300D

    Crusty turbo VNT lever

    Hi all. Last year I did the Easy Off oven cleaner method on my turbo (265K) to free up a crusty vane arm. And installed a new VNT as the old one was rusted through. Procedure worked nicely, but now it’s back to being stuck. I don’t think it’s carbon, but more of a rust thing. I have a lower...
  14. 300D

    Quality Pre-painted fenders?

    Anyone have any luck with the online pre-painted fenders? Which companies have people tried? My doglegs on both sides are pretty well perforated. I have done the clean-out and por-15 and paint and and, but really it's a losing battle. Rest of the car is actually pretty great considering coastal...
  15. 300D

    Not Mine: Golf TDI needs repair: Maine: $800

    https://maine.craigslist.org/cto/d/bristol-2002-vw-golf-tdi/7067039947.html
  16. 300D

    Building a 2.5" Turbo back exhaust parts?

    After my overly exhaustive search comparison of every single exhaust setup possible/available for 2003 wagon I have found a local VW guy who is going to fabricate a 304 stainless system for me for a decent price. I want it to be 2.5" and I want it to be inspection compliant and decently quiet...
  17. 300D

    A Craigslist Spotting: 2003 Wagon 5-speed: Maine

    Not mine, but looks pretty good: https://maine.craigslist.org/pts/d/oxford-tdi-vw-wagon/7051300608.html
  18. 300D

    Coolant issue, need advice ASAP!

    I am sitting at a gas station. Recently completely engine swap. Everything was checking out great. Now out for a more extended drive and car is very slowly overheating. No heat from vents. Tried opening coolant, but it just bubbled and rushed full with more coolant. Temp got up to 114 c. Coolant...
  19. 300D

    Coolant hard pipe, auto vs manual

    In my endless freezing cold exercise of swapping engines I cleaned up the coolant hard pipe and installed a new seal. But just realized I did this to the donor engine’s hard pipe, which was off an automatic car. To save me a trip out to my shed, and then out under the tarp in 9 degree temps...
  20. 300D

    Harmonic balancer styles for ALH

    Mid engine swap. I have two different harmonic balancer styles in front of me. Fatty looking ‘older’ style, and the thin looking ‘newer’ style that uses shorter bolts. Both engines are 2003. Engine coming out had the older style fatty. Any preference? Manual transmission with SMF conversion if...
Top