Search results

  1. S

    crankcase pressure

    thank for the input guys . ill let you know i make out .
  2. S

    crankcase pressure

    do you know if they make a rebuild kit for these pumps that would fix the problem
  3. S

    crankcase pressure

    can i fix this or does it need a new vacuum pump .
  4. S

    crankcase pressure

    that fitting wiggles around quite a bit , but i can't pull it out of the pump . how much play should there be , if any .
  5. S

    crankcase pressure

    im not sure where you would this problem . anyway , how much pressure should there be in the crankcase when running . on my other engines , i can add oil or dye to the crankcase while its running . i tried to put dye in my ALH (wile running) , to find my oil leak , and non of it went in . went...
  6. S

    ABS to non ABS breaks

    i solved the problem . took out the instrument cluster , took it all apart , used a soldering iron and pulled the abs LED rite off the board . reassembled and reinstalled the cluster . no more light . took it back to be inspected and passed . thanks for your input guys .
  7. S

    ABS to non ABS breaks

    thanks for the tip it seems to be working thanks again .
  8. S

    ABS to non ABS breaks

    OK guys another problem has just arose . my rear window goes up and down on its own and will not close . it stops about 4 inches from the top . if you hit the switch to close , the window goes down then up to the same position ( 4 inches from top ) and stops . i'm confused .
  9. S

    ABS to non ABS breaks

    thanks , i'll look into that to program an ABS delete .
  10. S

    ABS to non ABS breaks

    as soon as they plug it in , it comes up (01276 - ABS hydraulic pump) no pass
  11. S

    ABS to non ABS breaks

    ny long island nassau county .2 different inspection stations failed me
  12. S

    ABS to non ABS breaks

    the pump pump again this is the second pump
  13. S

    ABS to non ABS breaks

    i wouldn't mind the abs light staying on all the time , but they will not pass it for inspection in NY . no beeps or anything just the abs light on all the time , but brakes work fine otherwise
  14. S

    ABS to non ABS breaks

    I wouldn"t mind the abs light on . but they will not pass me for inspection in NY .
  15. S

    ABS to non ABS breaks

    have had nothing but problems with mine since 2005 . now this is the second pump that i have to replace
  16. S

    ABS to non ABS breaks

    convert ABS to non ABS breaks on MK4 jetta wagon
  17. S

    BHW ( PD ) interchangeable

    hay guys , would anyone know if the motor mounts , intake manifold ,and exhaust manifold could be interchanged with any other newer 2.0l TDI ?
Top