Search results

  1. O

    Piggybacking a MK4 fusebox to a MK1 rabbit fusebox

    DIY piggybacking the MK4 ALH wiring fusebox onto a MK1 rabbit fusebox. The MK4 box handles the engine only, the mk1 box covers everything else in the car. Is it as simple as combining the ignition wires to both boxes with a battery (30) & ground to both boxes, and combine 50/15/X on the mk1...
  2. O

    Minimum k-wire to set pump timing with VCDS

    Seems like this was kinda/maybe answered previously here .. https://forums.tdiclub.com/index.php?threads/wiring-in-obd-on-a-swap.473545/ Having to rewire the k-wire to get the OBD scanner to work seems like a really high priority job for it not to be mentioned almost anywhere. In short, the...
  3. O

    Minimum k-wire to set pump timing with VCDS

    To keep the k-wire available for VCDS pump timing and maps etc, what is the bare minimum k-wire config needed on an 03' new beetle ALH? (going into a 79' mk1 rabbit). I have cut out the grey/white splits to the radio, comfort module, abs and airbags. Currently its just OBD port (pin 7) to the...
Top