Search results

  1. dvst8r

    Replacment for displacment!!!!!

    Glad to see it back together Andy. Not what I was picturing when we were discussing stud length's, but innovative none the less. You coming to Edmonton again this year for what was blackout?
  2. dvst8r

    Best Place to get injectors balenced?

    Exergy Engineering. http://exergyengineering.com Founded by former bosch engineers. No better work out there, but be prepared to pay for it.
  3. dvst8r

    Recommend a Shop in Calgary, AB for timing belt replacement.

    Ironically one of the VW Dealers in town (5th Ave autohaus) was the cheapest by over $100.
  4. dvst8r

    Recommend a Shop in Calgary, AB for timing belt replacement.

    Typically this is something I would do on my own, however the timing is not going to work out. My project truck is still in the garage, and won't be mobile till after this work needs to be done. So I need to buck up and farm it out. Any recommended shops?
  5. dvst8r

    Has anyone heard from Mark Malone lately?

    Oh and I was on MSN with Mark a day or two ago, he is busy but around.
  6. dvst8r

    Has anyone heard from Mark Malone lately?

    LOL, I am thinking by the winky face that you must know Mark. If not the "peaceful silence" irony is quite funny.
  7. dvst8r

    I want Compound Turbo's! What do I need?

    Strange I am sure I had a couple replies in here... :confused: NM just read at the top of the page about the issue... don't feel like retyping all that hopefully the OP read it before it was gone.
  8. dvst8r

    I want Compound Turbo's! What do I need?

    O'rly? I am sure Andy2 would love that simplicity, and not have to worry about surging, or having a turbo light before 3000rpm's, or having it bark or general driveablility... How much power can a fwd handle? I can think of more then a few 800whp ones off the top of my head.
  9. dvst8r

    I want Compound Turbo's! What do I need?

    The saying goes "if you have to ask..."
  10. dvst8r

    Audi A4R4 450HP CBEA (CR) Build

    Since not many other people have commented on the head, It looks like it would be repairable, BUT and this is a big BUT, it looks like it would be less time / money / effort to start with another head. I can't imagine that sourcing new seats will be easy or inexpensive. Not to mention the...
  11. dvst8r

    need better rods

    Andy you are out of primary turbo, if you were running an HX-35 at that kinda power, or was that your hybrid?
  12. dvst8r

    need better rods

    Andy that sucks to hear. It seems that build has been one step forward two steps back. There are always options just depends on how much you want to spend. Arias will make you pistons, I know a number of pullers that are running them, so they are quite familiar with needs of a diesel. If...
  13. dvst8r

    Who can tune CR Volkswagens?

    Must be... http://forums.tdiclub.com/showthread.php?t=286786 :rolleyes:
  14. dvst8r

    Need bigger turbo...will GT3063v work on 8v VE?

    Nice numbers! That sounds like an awfully big secondary, but probably a decent sized primary...
  15. dvst8r

    Need bigger turbo...will GT3063v work on 8v VE?

    I believe Andy2 has, iirc it seized, and now is a paper weight.
  16. dvst8r

    GT1749V with GT3880 compound setup?

    I completely disagree, if this were true there would be no R&D at the Pro FWD level of drag racing. So far the quickest TDI in north america, is barely an avg econbox turbo setup, as far as E.T and MPH is concerned. You sir have obviously never sprayed an over fueled engine, or have been...
  17. dvst8r

    GT1749V with GT3880 compound setup?

    My problem with that is; these heads flow so terribly that you need the compounding effect all the way through to redline, in order to be able to stuff the volume of air in, and most LP turbo's in the sizes we are talking about don't support those kind of pressure ratios on their own. However...
  18. dvst8r

    GT1749V with GT3880 compound setup?

    Hence my reference to doing it crudely via manual methods.
  19. dvst8r

    GT1749V with GT3880 compound setup?

    It was almost like I had that 8 blade map here in front of me... ;) That he341ve would be a solid choice for a primary. However I am not sure about the ecu's capability of controlling a VNT primary. Some one like Mark or Jeff would have to chime in on that. It could be done kind of crudely via...
  20. dvst8r

    GT1749V with GT3880 compound setup?

    Being that the edge of the map that Rub87 is about 50lbs/min I would have to guess it is probably an HY-35. Possibly an 8 blade HX-35. However the one thing it is not is an HE351.
Top