Search results

  1. kylesobrien

    Need your help !

    @sergiotrevizo123 from a very brief search, looks like a few vendors have NOS lines available, curious if 1J0-200-059-AG would also work for you. I have partslink24 access for another couple weeks, you're welcome to PM me your VIN so that I can take a look and confirm if you like.
  2. kylesobrien

    Timing Belts, big jobs in NH

    I was fortunate to speak with Mr. Pasker by phone earlier this month, a kind gentleman full of knowledge. He told me he has "stepped back from the TDI arena" a bit since his wife's passing; I'm not sure how frequently he works on cars anymore. We only spoke for 15 minutes, but I appreciated our...
  3. kylesobrien

    Replacing a Jetta EGT sensor (P0544) -- procedure and parts?

    Resolved. Incidentally, in case it helps anyone else in the future, the gasket part number is 1K0 253 115AG. It doesn't show up on partslink24, but IDParts (thanks, guys!) confirmed this for me earlier today.
  4. kylesobrien

    Replacing a Jetta EGT sensor (P0544) -- procedure and parts?

    The EGT sensor before the turbo (G235) failed on my 2013 Jetta TDI sedan, and the mechanic removed the front axle and was about to detach the EGR tube to access it -- he's having difficulty finding the gasket seal for the 1K0 253 725E clamp. Am I correct that the gasket/clamp are specific to...
  5. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    I never did post here with an update, but doing it now in case it helps someone later. In any case: - can I upgrade my original 2013 BCM (5C0 937 087 A) to a 2015 Jetta highline BCM (such as 7H0 937 090 E)? Yes and no -- there are compatible highline BCMs, but my initial guess was not the...
  6. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    A brief update, I found a Ross-Tech post including an autoscan log where the Jetta owner has the same BCM I mention above, with integrated CAN gateway, and it includes address 5F (the MIB2) with a summary of all the current adaptations. The same poster has both park distance control and a...
  7. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    @vito3223 Sorry for bugging you, but I believe you upgraded your Jetta cluster many years ago, curious if you have any thoughts on swapping a newer PQ25 BCM into my TDI which will properly recognize an MIB2 radio.
  8. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    Thanks for jumping in, @Cuzoe. I might be mistaken, but I think the non-GLI Jettas of my car's era are actually PQ25, not PQ35 -- mentioned on the RossTech page here: VW Jetta (16) Body Control Module - Ross-Tech Wiki ... and also on this TDIClub thread I just found here: Full mfd upgrade |...
  9. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    @pedroYUL Thanks! I appreciate it, I did a lot of work on my 1992 8V GTI and 2003 1.8T GTI years ago, but things were somewhat less complicated then...
  10. kylesobrien

    2015 highline BCM upgrade in non-GLI Jetta 2013 TDI?

    I've been lurking around the forums for a few years, but after a few desperate days of searching, I've decided to submit my first post -- greetings! I recently installed an MIB2 Discover Media head unit (component protection deactivated) in my 2013 Jetta TDI. Navigation works, the radio works...
Top