Search results

It needs a lot of study to find out what you need, mostly empirical Nexus 5 rules...

3B0920847E will definitely work with lamp failure function because i have one installed on my passat working with lamp failure :cool:

I got my passat 2003 since 2007 and i never changed a bulb....osram germany ?!?

Read entire thread. It is all here.

can wires getting out from 451 relay were reversed(1 with 3). now everything is working but steering switches lights are still flashing. what could be wrong?

have you solved the problem? i also instaled a navigation with tmc steering fis cluster and it doesnt work. the lights in steering switches are flashing and nothing is working. with relay 452 the cruise and horn is working and lights of steering switches are ok. with 451 relay nothing is working.

NO CHANCE tu use usb. Let's come back to my problem. I've changed, as you already know, everything : - new CCM - another pair of voluemtrics - new volumetrics wiring - attached IM switch button. Results : - H12 i think was crazy, aftter i removed and put back the plug connector of H12 it...

LE : I think my new CCM needed a few time to reinitialize itself. Now, after 5 minutes, it is working fine. Now remains the problem with H12 - electronic siren issue :confused: On this adresses I have these values : INTERIOR MONITORING/BOOTLID SWITCH/ADAPTATION CHANEL IM feature : 04355 =...

After some days problem reappeared so i think CCM or wiring were guilty for that so i tried to write up CCM with a OEM IM activated dump from EU PAssat 2004 Berlina(1C0959799B) but that broke my 1C0959799B. So i replaced my 1C0959799B with another 1C0959799B(from a UK Passat 2004 with OEM...

Problem solved. Thanks blizzard for your idea. I wouldn't think to solder lamp. After soldering lamps everything is fine. IM works even with open windows. And i have no errors anymore. Ps : tony, it woks with no additional diodes. Thanks a lot guys.

tomorrow i'll solder connections in both lamps.today it worked alarma once after i checked lamps so i think there is a solder problem. thanks for the idea

i'm afraid i did nothing with diodes method. Rear trunk lamp has already a diode. I used only for front central lamp but error was still there. I found instead an older dump of my 1C0959799B(nov 2010) and uploaded in my CCM with no luck. error 01135 is still there. Where can i find a dump for...

thnaks guy especially tonyM. PS: hi graeme. (i could not resist to say hello to you :) )

I have a problem with my ccm. Atfer several mods i observed that my interior monitoring is not working at all. I checked and error 01135 - Interior monitoring sensors - Open circuit appears. I checked wires til CCM and they are all ok. I also checked wiring board of ccm and also everything is...

I can give you in some days a 1C0959799 dump from a euro pasat 2003 with folding mirrors and memory seats. PS : Any news :D ?

Wow, thanks a lot Mike.;)

Are you crazy ?! :eek:. You tell us that in this moment yo have fitted a petrol cluster with 7000 rpm ?! and it WORKS?! IN that case you can't have glow plug indicator. In it's place there is EPC indicator.

1st : Car symbol reappeared. Wellcome and needles too !! 2nd : There is no wire in my car. Only wires i've put on it are in cluster's T32a(blue) on pins 6 and 16, but these 2 wires are just hanging up waiting for the relay to be connected. I repeat. There is no wire connected because my relay...

I just activated function. No relay is connected yet. My relay is on the way via mail from England. But I already installed wires on T32a/6 and T32a/16(T32a is blue conector)