Search results

Wifes 6-speed Sportwagon for sale to HIGEST BIDDER' It's got a Stevenson ECO tune and 195,000 miles with no problems EXCEPT: lack of certain exhaust components due to pothole is making it hard to get its yearly state inspection and dent in rear hatch. Steelies w/Hakkapeliitta's and summer alloys...

Thanks everyone for the tips. Wife says after it dings, a light flashes, and then a brake message scrolls accross the screen. It goes away and then comes back. I will check connections and Master Cyl. Monday. She's working today and I work Sunday. Thanks

My wifes 2013 JSW 6spd. 185,000 mi. has been beeping at her and a warning light flashes on dash something about brakes. Stops well and shifts well, but as far as I was able to determine when we bought it @ 109,000, it's still on the original clutch. We're rural, and so was the PO so not a lot of...

Northern Vermont diesel dropped to $3.97 last week but reg. gas can still be had for $3.39. I'm not complaining, it's the least we've seen since Jan. 2021.

You're quite possibly correct. The tune on our CJAA is set to have the monitors show ready for inspection. It's usually not part of the software code unless requested. I would try to contact Tunezilla.

OK, I'll have to look and see if it's still there. I didn't think there was anything left 'cept a muffler and resonator.

001151 Exhaust Pressure Control Valve P047F-000 Stuck Open Car has Stevenson ECO tune-Runs Fine What does this mean?

But will it meet my inspection requirement?

I have the delete exhaust from Rawtec sitting here. I'm torn right now between Malone, Stevenson, and MR tuning companies. When deleted and tuned, the car must be able to pass Vt. state inspection once per year. That means no ck. engine lights, and readiness monitors set to "ready". I'm not...

I'm torn between 3 different tuners right now for my wife's CJAA. Malone, Stevenson and MR. I MUST pass state inspection. No ck. engine lights and readiness must be "ready". I'm only after economy and longevity.

Thanks guys for all the help. I've been in touch with Xavier Gagne (once since last spring, I lost his contact info) I think at this time I'll likely have him do the work. It's not really that easy to cross the border to Canada. )It's hard to get your Covid test results back in the required...

All we're interested in is getting rid of the emission control garbage and a tune to prevent check engine lights and so forth. Do you think he's OK for that? He says he will use a block-off plate on the EGR. Will that prevent it from leaking in the future?

I finally found "Xavier Gagne" who is near Sherbrooke and will take care of the TDI as soon as the border opens! We can't wait either!

Who in Vermont or Quebec can help me. I'm in Newport, Vermont.

I'm in Newport Vt. Can anyone near the border in Quebec help?

Yeah. They're about 65 miles away but I have a Bud in that town. He's going to grab them today and we'll see each other in Feb, for the exchange of cash and wheels. Perfect.

I found a decent set! 225. Thanks guys! https://vermont.craigslist.org/wto/d/milton-in-vw-black-alloy-wheels/7248112469.html

Thanks for that. I'd like to find a used VW set that's not been rin in our winters. Weight, etc. mean nothing. Any alloys should both weigh less and look better than her current steelies and the plastic hubcaps. Plus it will save the expense of having them dismounted, changed and rebalanced 2x...

Thanks guys. I'm looking for a set of alloys for the wifes Mk6 TDI that has steel 16" wheels. Her studded Nokians are on them now. I'm looking for a good set of 16" alloys (don't care what brand, VW or aftermarket) for her summer tires. I thought they were 100mm bolt circle but are they 112mm? I...

I'm looking for a reasonably priced set of used alloys for the wife's summer tires. '13 Mk 6 JSW. I think 100mm is the bolt circle but what offset, or what offsets are acceptable? Thanks