Search results

tdi

Im wondering if it's possible to buy just two coilovers for the front of my jetta? i got a 50mm 40mm lowering cup kit on now, but would like to up grade to coilovers, Im having some issues with the lowering kit in the front end, and would just like to switch the front ones out with coilovers...

hey i got pretty much the same set up as you do. and having about the same problem. i'v seen my autometer spike up to 35psi then drop back to 30psi and hold there.

It's a cummins can't beat it!!!!! better then a powerjoke or a dritymax........

Thanks. But can some tell me if the H&R 22mm sway bar will fix the RUBBING?

And i can't fine any thing on how to remove the swaybar? is it a hard job? I did my suspension my self just wondering how hard the swaybar is to change?

Diesel went to 2.85 and RUG gas is 1.99

Is this a good buy? and will it fix the rubbing...

A steel skide plate was the first thing i got. read my signature!

Any One?

I need some help hear?? And i searched and couldnt fine what i was looking for!!! I lowerd my 99.5 jetta with the 50/40 super sport cup kit, and need to upgrade my swaybar, cause of my axle rubbing the swaybar, I'm looking at the H&R front swaybar it's the 22mm, is this what i need? I'v read...

$2.89 hear in shippensburg PA Rug gas is going for $2.19

3.29 hear. saw it yesterday in breezwood pa for 3.17

I would like to know how big the turbo is?

How can i up grade the sway bar?

You mean the bolt that hold's the strut inplace on the hub(?)

Has anyone ever experienced a problem with the front passenger side axle rubbing the sway bar(?)? It will rub when you hit slight bump or when you turn to the right. It mostly rubs when the car leans to that side. I just put new lowering struts..a 2 inch drop in the front and an inch and a half...

saw it yeaterday in carlisie pa for 3.89 a gal

Yes it's a rabbit pickup! And the wheeler on the back didnt slow it down much at all!!!!!

Yes. honda there ant a better way two go!!!! My bubby has a honda trx450r wich is now a 470...