Search results

So I have ina lifters I’m about to install in my alh engine. Is it safe to say I can remove the large spring? I have sdi cam. Thanks

How did you alh 2.0 build turn out. I’m in the process right now of building one. I was hoping to put it together this weekend but I didn’t know I had to use a 2.0 crank. I have new bhw pistons and new eurotech h-beam rods. Block is already bored. Now I’m on the hunt for a bhw crank, if you know...

I’m losing coolant also from my reservoir. I believe it’s a head gasket causing my problem. Any thoughts.?

Thanks for the replies. Ok so it’s normal to plateau around 2200 rpm? I was wrong when I said 3200rpm.

Red line is specified. Green is actual. Towards the end you can see the specified plateaus . Where the acual drops off then peaks again is me leaving off the throttle and back on again because the clutch is slipping. But the specified stays the same. I swapped Maf from the spare car I have and...

Photo

Hello everyone. I recently swapped injectors and ecu from a parts car that I was told were bigger injectors and a tuned ecu. Both were true. Just wish I know what I had for nozzles and a tune. I did some live data on Maf specified/maf actual. My specified plateaus on the graph. I’m at about 3200...

Just need my skc code! I have the full version of vcds. Hex-v2 cable. I bought the kkl vag-com for 409.1 cable. I’m not very good with computers but I did get the kkl cable to I guess work with vcds light. So I had to register but I already have a license for vcds. They emailed back today and...

Ok that is all I need is the SKC maybe radio code from the 03. I have vcds and can understand it pretty well. But….im not real computer savvy and having a little trouble understanding the procedure. I tried downloading what I thought was right but it said something wasn’t compatible. I don’t...

Is kw1281test still available? I have a 2002 Jetta alh tdi. I’m trying to swap a 2003 tuned ecu into my 2002 non tuned. Any help would be great