Search results

Maybe getting closer to answering my own question.... When looking in ETKA 7.4 for this car it lists 6 different wiring harnesses depending on manufacture date and whether automatic or manual trans. Below the 6 harnesses is listed all the component connector part numbers that can be orderer...

Engine wire harness chafing seems more prevalent on the previous generation BRM engines. My early "loyalty" CBEA seems to have left-over BRM stuff (like the earlier version fuel filter) so maybe the car also got the BRM type sharp-edged wire harness loom. In any case the previously mentioned...

Greetings....have an early "loyalty" 2009 TDI (VIN ends in 002xxx, 90K miles) with what I suspect are engine wiring harness related problems. Dealer-mended harness is suspect again after working fine for a year (harness "fixed" after crank angle sensor mis-diag/replacement by dealer). I plan on...

First time posting. Hoping to help others with same symptoms (but with different solution). 2009 TDI 86K miles. Intermittent P2015 after a few weeks became solid. Flap motor appeared dead through VCDS but if I held the actuator arm about 30 degrees from resting it would move during VCDS output...