Search results

Maybe check the module. If one side is working and the other isn't, it's worth swapping the working one with the non working one. The module is located on the back of the headlight housing. It's not difficult to remove these headlight housings just a bit of a pain. I just removed mine a few...

Spill the beans.

I followed the video I posted and this resolved the issue. At first I tightened it a little too much causing the e brake to be engaged with the handle down. I backed it off and tested it multiple different scenarios.

Same here. She describes something then I can never get it to do it. I've got where I have her send me videos when something doesn't seem right. I'm going to check the tightness of the cable to the handle like the video I posted tomorrow or this weekend. It's supposed to warm up some. I know...

I'm going to check all the cables and other items. Before I get under there and trace it does anyone know which rear caliper the brake uses or is it both? I'm also going to check the handle tightness like in this video. What he's showing there is exactly what a video she sent me of it popping up...

Having random issues where the parking brake wants to pop up on its own and then seem like it won't stay down and have to keep something on top of it. I've not personally been able to replicate it. The wife says when she goes to reverse the rear hikes up like it's still engaged. Also says same...

I didn't want the can us because I've heard it then basically blocks the light from communicating so you wouldn't know if there is an issue with it.

I did and these were the instructions to make the error go away. The other options listed in that particular channel are below. 11- Low beam 12-flashing lights 13-brake lights 14-combined indicator and brake lights 15-general light bulb 6W: also H6W 16-2*3W 17-43W 18-25W 19-35W 20-45W...

I went into module 9 and changed the HA59 Lasttyp 25 to 43-allgemine LED I still get the error when I switch my headlights on. I also used Google translate to translate the other options from German to English and selected some of the other led options from the new value list and nothing makes...

Not sure I'm understanding what I'm looking for. If I'm supposed to be looking in module 59 I get no response when trying to scan that module and it's not under my installed modules.

Cool. I'll check and update here if it fixed the error. Thanks for the response!

What coding do I need to make the license plate bulb error go away? I changed out my license plate bulbs with led now getting a check license plate lighting error.

Thanks. I just changed out my license plate lights to LED now I'm getting a check license plate lighting error on my vehicle messages. Any idea how to clear that with vcds? Thanks

I just got a 2015 Golf SEL 6speed. I just ordered a VCDS cable. Can someone point me in the right direction of a list of the coding for what does what or a thread here that has that information?

I've got until May 2026 according to both my dealer and VW of America

I have a ross tech VCDS cable on the way.

I just picked up a 2015 Golf SEL 6speed with 80k miles all emissions equipment intact. I'm wanting to get a tune. I know there are 3 or 4 companies that offer "canned tunes". I'm new to diesel but not new to performance cars. In my gasoline performance car the "canned tunes" are definitely...

I made sure that I had a clean cutoff line on the Lexus projectors.

If I'm reading correctly on this forum..... To adjust the headlights up or down... That needs to be done through some sort of software? I noticed my right headlight is pointed too high. VCDS or something like that? And also saw where you can turn off the DOT limitations of these bulbs in the...

Can these bulbs be upgraded with a bright LED? If so, what size? They're not quite the 5000k color I'd like them to be and really don't seem all that bright.