Search results

  1. Amys1stTDI

    My 2003 TDI ALH won’t start

    Won’t start even with the serpentine belt off, the starter is engaging it’s just not finding the flywheel. The transmission is in neutral and honestly I don’t even have my emergency brake on as it’s on flat land and dirt like sand it’s not going anywhere lol. The timing belt is still nice and...
  2. Amys1stTDI

    My 2003 TDI ALH won’t start

    No my engine won’t budge by hand.
  3. Amys1stTDI

    My 2003 TDI ALH won’t start

    Well apparently my starter is not connecting with the flywheel to start the car, so I’m thinking the noise I heard was something from the dmf. Wish I could see the flywheel without taking it apart, oh well a little more diagnostics and I will probably be replacing my clutch.
  4. Amys1stTDI

    My 2003 TDI ALH won’t start

    So I hooked my friends jeep up to it to try to start it and this is what I got
  5. IMG_3085.mov

    IMG_3085.mov

  6. Amys1stTDI

    My 2003 TDI ALH won’t start

    I replaced the starter, it tested bad. There was a grinding noise coming from my belts if it is not my serpentine belt then it could be something with my timing belt so I wanna make sure it moves freely and something in there is not grinding, gotta be a reason why it’s not starting. It’s just...
  7. Amys1stTDI

    My 2003 TDI ALH won’t start

    My starter tested bad so I replaced it, so shouldn’t be the solenoid. I’m going to clean both battery posts here in a second. I thought one of my pulleys seized up because I heard a grinding noise coming around where belts are, but all the pulleys move freely and not wobbling. Fixing to turn my...
  8. Amys1stTDI

    My 2003 TDI ALH won’t start

    Nothing, no turn no crank nothing
  9. Amys1stTDI

    My 2003 TDI ALH won’t start

    My starter tested bad, waiting on a new one, my flywheel looks fine, teeth still there, still don’t know what the grinding noise was or if it’s still there, guess I’ll find out when I get the starter.
  10. Amys1stTDI

    My 2003 TDI ALH won’t start

    Is there a way to use my vcds to find out what’s going on?
  11. Amys1stTDI

    My 2003 TDI ALH won’t start

    Won’t start at all, with or without the belt.
  12. Amys1stTDI

    My 2003 TDI ALH won’t start

    I was driving home from work and heard a loud noise, followed with a grinding noise coming from the belt area got home, went back out screamed when I started it and the grinding noise continued, took for drive, started her again and same noises with more vibration, won’t start now. Checked...
  13. Amys1stTDI

    Egr excessive flow

    Just got the new ip on the car, drove realized I have no boost, throwing an egr excessive flow code, but my egr was deleted so I’m at a loss, not to mention that the egr is brand new itself as I changed it last year. My Vag-com says a 16768 egr system. Lol I just want my boost back as it sucks...
  14. Amys1stTDI

    Flywheel mark passed the TDC

    The pump locking pin is in its place too, pumps almost out. My car will be done today.
  15. Amys1stTDI

    Flywheel mark passed the TDC

    It’s all good, I’m in TDC we removed glow plugs and felt the swooshes of air, pump is locked in place, so is the camshaft, I’m taking it as no mark on the flywheel so I’m going to mark it myself. Everything is in alignment.
  16. IMG_0600.jpeg

    IMG_0600.jpeg

    TDC
  17. IMG_0599.jpeg

    IMG_0599.jpeg

    TDC
  18. Amys1stTDI

    Flywheel mark passed the TDC

    I’m trying to replace my injection pump, gotta put it in time before I remove the pump. Found the flywheel mark but an another half turn to get the camshaft locking plate in. How do I fix it where all the marks line up? Could the other people who worked on it, not set any marks but just put it...
  19. IMG_0579.jpeg

    IMG_0579.jpeg

  20. IMG_0581.png

    IMG_0581.png

Top